API 6A Good Quality Mud Manifold

Model NO.: Y-Mud Manifold
Type: API 6A API 16c
Trademark: YOUYAO
Transport Package: Wooden Box
Specification: 1′′ 2′′ 3′′ 4′′ 5′′
Origin: China
HS Code: 84314310
Model NO.: Y-Mud Manifold
Type: API 6A API 16c
Trademark: YOUYAO
Transport Package: Wooden Box
Specification: 1′′ 2′′ 3′′ 4′′ 5′′
Origin: China
HS Code: 84314310

Product Description
ZJGH-35S drilling mud manifold consists of the Z23Y-35/100 & Z23Y-35/50 mud valve, high pressure spherical union, high pressure core union, tee, high pressure hose, elbow, pressure gauge, and pup joint etc.
Ground valve-group adopts gooseneck type tee with compact structure, little fluid resistance and large power effectuality. Adaptor spool adopted on rigid valve-group can be directly used as single pipe on site.
The high pressure unions are made from high-strength alloy steels and heat treated, featuring tight make-up and easy break-out. The special machine tool is used for the manufacture of the unions. The fine machined sphere and core work together with O-rings to provide sealing.
The sealing surfaces of both the gate and seat of the Z23Y-5000psi mud valve are built up using hard alloy overlays for erosion and corrosion resistance, which prolongs the mud valve's service life, reduces the operating torques and makes the operation easy.
With the walls thickened as applicable and heat treated, the elbow, reducing pipe, tee and cross are made from high strength alloy steels and can fully meet the strength and corrosion requirements.
In order to ensure the product quality, the parts that require high precision are manufactured using special technology and all pressure-containing parts are hydrostatically tested prior to assembly.
Operating Instructions            
1. Clean and grease both the sealing face and sealing groove of unions and clean the inside of the line pipe.
2. Check whether all connecting positions are fastened.        
Maintenance              
1. Inject grease into the mud gate valve at specified intervals.         
2. Check whether all connecting positions and fixing bolts are loose at specified intervals.  
3. If the leakage around the sealing position occurs, the seal shall be replaced immediately.  
4. Keep the outer surface of the manifold clean and do regular painting to prevent rust.  
Note:                
The Z23Y-5000PSI metal seated mud gate valve is only used as a shutoff valve and cann't be used as a choke valve, otherwise the sealing surface will be damaged.
GROUND CONTROL ASSEMBLY          
                 
During the cause of test, fluid should be controllably guided into separator and burner after flowing through drilling rod or tubing, the assembly is named as control assembly, which can control the pressure and flow-rate of the fluid safely and effectively.
1. Control Head              
Jointed with the upper of the test string, control head is classified into rotary head and un-rotary head of two kinds, and also into three kinds of 35MPa, 70MPa and 105MPa according to the bearing pressure, and it can let the high-pressure fluid flow out of string, but also pump fluid into well.
2. Rigid manifold              
Used to control fluid pressure and flow-rate, rigid manifold is jointed with control head upwards and connected with separator and blowout pipeline downwards.
The working pressure includes 35MPa, 70MPa and 105MPa with appropriate test pressure of 70MPa,105MPa and 140MPa.
3. Active manifold              
Used to joint the control head, rigid manifold and blowout pipeline, the manifold consists of special EUE seamless steel pipeline union and active elbow.
The working pressure includes 35MPa, 70MPa and 105MPa with appropriate test pressure of 70MPa,105MPa and 140MPa.
The manifold should be regularly inspected and lubricated, sealing ring should be replaced and sealing tested to ensure safety in test.
    Parts List:    
    Item Component Qty Material      
    1 Pressure Gauge 1        
    2 Needle Valve 4        
    3 Buffer 1        
    4 Tee 1 4130      
    5 Elbow 1 4130      
    6 Plug Valve 1        
    7 Tee 1 4130      
    8 Check Valve 4      
we have got API approved with our license number 6A-1227, 16C-0174, so plz find the following our valves and parts in stock or under production now:

CAMERON FC EE, PSL3, PR1 valves
1-13/16 10000psi  (40pcs)
2-1/16  10000PSI  (900pcs)
2-1/16  15000PSI  (55pcs)
2-9/16  10000PSI  (60pcs)
3-1/16  10000PSI  (60pcs)
4-1/16  10000PSI  (100pcs)
4-1/16  15000PSI  (50pcs)
5-1/8   100000psi  (55pcs)
7-1/16  100000psi  (44pcs)
CAMERON FC Pneumatic VALVE EE,PSL3,PR1 
2-1/16  5000PSI  (10pcs)
2-1/16  10000PSI  (20pcs)
3-1/16  10000PSI  (10pcs)
CAMERON FC HY VALVE EE,PSL3,PR1  
2-1/16  15000PSI  (30pcs)
3-1/16  15000PSI  (20pcs)
 
CAMERON FLS VALVE,EE,PSL3,PR1
7-1/16 10000PSI BALL SCREW FLS VALVE (10pcs)
410SS+supersonic tungsten caribde gates and seats: 
1-13/16" 10000PSI              450sets
2-1/16" 10000PSI, 15000PSI     300sets
2-9/16" 10000PSI, 15000PSI     200sets
3-1/16" 10000PSI               400sets 
3-1/16" 15000PSI               100sets
4-1/16" 10000PSI               300sets
4-1/16" 15000PSI               200sets
5-1/8" 10000PSI                350sets
7-1/16" 10000PSI               300sets
CAMERON WKM  
2-1/16"   5000PSI    300SET    
3-1/8"    5000PSI    50 sets     
4-1/16"   5000psi    50sets   
7-1/16"   20sets
CAMERON DEMCO   
2"  5000PSI   40 sets    
3"  5000psi   40sets    
4"  5000psi   30sets    
5"   5000psi   50sets
                     
DEMCO  2"    7500PSI     20 sets   
3"  7500psi    15sets   
4"   7500psi   20  sets    
5"  7500psi   30 sets
UNIONS
FIG206 2" 150,  3" 100, 4"   300PCS
FIG602,1502   2" 100,  3" 150, 4"   100PCS under production
Also type of BOPS including models as following, total quantity 50sets:
21-1/4" 2k annular 
Double-ram 21 1/4" 3K 
annular 13 5/8" 5K
Double-ram 13 5/8" 10K 
Single-ram 13 5/8" 10K 
Annular-11" 10K    
D-Ram 11" 15K                   
S-ram 11" 15K   
Annular-9" 10K      
D-Ram 11" 15K                   
S-ram 9" 15K   
D-Ram 9" 15K     
Annular-7" 10K   
D-Ram 7" 15K                   
S-ram 7 " 15K   
Annular - 7 " 5K      
D-Ram 7" 10K                   
S-ram 7 " 10K   
D-Ram 7" 5K                  
S-ram 7 " 5K   

XQ140-12YA   15pcs  
XQ140-12YT   6pcs    
TQ340/35     7pcs   
ZQ127-25Y    15pcs 
XQ114-6YB    13pcs
XQ89/3YB     11pcs
HYDRAULIC POWER TONG, MODEL YD160,   3 SETS

As you can see that our production range is very wide, for any need or inquiry of the above, just contact with me freely, looking forward to start our cooperation through our mutual efforts and your further reply would be highly appreciated.
 
Product Description
ZJGH-35S drilling mud manifold consists of the Z23Y-35/100 & Z23Y-35/50 mud valve, high pressure spherical union, high pressure core union, tee, high pressure hose, elbow, pressure gauge, and pup joint etc.
Ground valve-group adopts gooseneck type tee with compact structure, little fluid resistance and large power effectuality. Adaptor spool adopted on rigid valve-group can be directly used as single pipe on site.
The high pressure unions are made from high-strength alloy steels and heat treated, featuring tight make-up and easy break-out. The special machine tool is used for the manufacture of the unions. The fine machined sphere and core work together with O-rings to provide sealing.
The sealing surfaces of both the gate and seat of the Z23Y-5000psi mud valve are built up using hard alloy overlays for erosion and corrosion resistance, which prolongs the mud valve's service life, reduces the operating torques and makes the operation easy.
With the walls thickened as applicable and heat treated, the elbow, reducing pipe, tee and cross are made from high strength alloy steels and can fully meet the strength and corrosion requirements.
In order to ensure the product quality, the parts that require high precision are manufactured using special technology and all pressure-containing parts are hydrostatically tested prior to assembly.
Operating Instructions            
1. Clean and grease both the sealing face and sealing groove of unions and clean the inside of the line pipe.
2. Check whether all connecting positions are fastened.        
Maintenance              
1. Inject grease into the mud gate valve at specified intervals.         
2. Check whether all connecting positions and fixing bolts are loose at specified intervals.  
3. If the leakage around the sealing position occurs, the seal shall be replaced immediately.  
4. Keep the outer surface of the manifold clean and do regular painting to prevent rust.  
Note:                
The Z23Y-5000PSI metal seated mud gate valve is only used as a shutoff valve and cann't be used as a choke valve, otherwise the sealing surface will be damaged.
GROUND CONTROL ASSEMBLY          
                 
During the cause of test, fluid should be controllably guided into separator and burner after flowing through drilling rod or tubing, the assembly is named as control assembly, which can control the pressure and flow-rate of the fluid safely and effectively.
1. Control Head              
Jointed with the upper of the test string, control head is classified into rotary head and un-rotary head of two kinds, and also into three kinds of 35MPa, 70MPa and 105MPa according to the bearing pressure, and it can let the high-pressure fluid flow out of string, but also pump fluid into well.
2. Rigid manifold              
Used to control fluid pressure and flow-rate, rigid manifold is jointed with control head upwards and connected with separator and blowout pipeline downwards.
The working pressure includes 35MPa, 70MPa and 105MPa with appropriate test pressure of 70MPa,105MPa and 140MPa.
3. Active manifold              
Used to joint the control head, rigid manifold and blowout pipeline, the manifold consists of special EUE seamless steel pipeline union and active elbow.
The working pressure includes 35MPa, 70MPa and 105MPa with appropriate test pressure of 70MPa,105MPa and 140MPa.
The manifold should be regularly inspected and lubricated, sealing ring should be replaced and sealing tested to ensure safety in test.
    Parts List:    
    Item Component Qty Material      
    1 Pressure Gauge 1        
    2 Needle Valve 4        
    3 Buffer 1        
    4 Tee 1 4130      
    5 Elbow 1 4130      
    6 Plug Valve 1        
    7 Tee 1 4130      
    8 Check Valve 4      
we have got API approved with our license number 6A-1227, 16C-0174, so plz find the following our valves and parts in stock or under production now:

CAMERON FC EE, PSL3, PR1 valves
1-13/16 10000psi  (40pcs)
2-1/16  10000PSI  (900pcs)
2-1/16  15000PSI  (55pcs)
2-9/16  10000PSI  (60pcs)
3-1/16  10000PSI  (60pcs)
4-1/16  10000PSI  (100pcs)
4-1/16  15000PSI  (50pcs)
5-1/8   100000psi  (55pcs)
7-1/16  100000psi  (44pcs)
CAMERON FC Pneumatic VALVE EE,PSL3,PR1 
2-1/16  5000PSI  (10pcs)
2-1/16  10000PSI  (20pcs)
3-1/16  10000PSI  (10pcs)
CAMERON FC HY VALVE EE,PSL3,PR1  
2-1/16  15000PSI  (30pcs)
3-1/16  15000PSI  (20pcs)
 
CAMERON FLS VALVE,EE,PSL3,PR1
7-1/16 10000PSI BALL SCREW FLS VALVE (10pcs)
410SS+supersonic tungsten caribde gates and seats: 
1-13/16" 10000PSI              450sets
2-1/16" 10000PSI, 15000PSI     300sets
2-9/16" 10000PSI, 15000PSI     200sets
3-1/16" 10000PSI               400sets 
3-1/16" 15000PSI               100sets
4-1/16" 10000PSI               300sets
4-1/16" 15000PSI               200sets
5-1/8" 10000PSI                350sets
7-1/16" 10000PSI               300sets
CAMERON WKM  
2-1/16"   5000PSI    300SET    
3-1/8"    5000PSI    50 sets     
4-1/16"   5000psi    50sets   
7-1/16"   20sets
CAMERON DEMCO   
2"  5000PSI   40 sets    
3"  5000psi   40sets    
4"  5000psi   30sets    
5"   5000psi   50sets
                     
DEMCO  2"    7500PSI     20 sets   
3"  7500psi    15sets   
4"   7500psi   20  sets    
5"  7500psi   30 sets
UNIONS
FIG206 2" 150,  3" 100, 4"   300PCS
FIG602,1502   2" 100,  3" 150, 4"   100PCS under production
Also type of BOPS including models as following, total quantity 50sets:
21-1/4" 2k annular 
Double-ram 21 1/4" 3K 
annular 13 5/8" 5K
Double-ram 13 5/8" 10K 
Single-ram 13 5/8" 10K 
Annular-11" 10K    
D-Ram 11" 15K                   
S-ram 11" 15K   
Annular-9" 10K      
D-Ram 11" 15K                   
S-ram 9" 15K   
D-Ram 9" 15K     
Annular-7" 10K   
D-Ram 7" 15K                   
S-ram 7 " 15K   
Annular - 7 " 5K      
D-Ram 7" 10K                   
S-ram 7 " 10K   
D-Ram 7" 5K                  
S-ram 7 " 5K   

XQ140-12YA   15pcs  
XQ140-12YT   6pcs    
TQ340/35     7pcs   
ZQ127-25Y    15pcs 
XQ114-6YB    13pcs
XQ89/3YB     11pcs
HYDRAULIC POWER TONG, MODEL YD160,   3 SETS

As you can see that our production range is very wide, for any need or inquiry of the above, just contact with me freely, looking forward to start our cooperation through our mutual efforts and your further reply would be highly appreciated.
 

Belt Cleaner

Belt Cleaner,Abrasion Resistant Belt Cleaner,Polyurethane Conveyor Belt Cleaner,Secondary Belt Cleaner

Hebei Tongxiang Conveyor Machinery Co.,Ltd , https://www.hbtxroller.com