 A. Size: per drawing
B. Material: Brass etc
C. Finish: All kind
D. MOQ: 10000PCS
E. Sample lead time: 15days
Similar Products:(Per drawing)
 Machining basic parameters
| 1 | Material | copper, aluminum, iron, stainless steel, 45 #, POM and other environmental friendly materials |
| 2 | Specifications | M1.0-M15, the maximum diameter of machining is 30MM, and the largest diameter of casting is 790MM. |
| 3 | Surface Treatment | white zinc, yellow zinc nickel, copper, chromium, tin, gold, silver, etc. |
| 4 | Tolerance |
Outer diameter tolerance +/- 0.01mm;Â Â Â Length tolerance +/- 0.01mm Threads can be checked by go-and-not-go-gauge. |
| 5 | Processing Methods | manufacture of blue drawing, sample and raw material |
  Production equipment
Â
 Detection Device
Certificate
FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.
2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report, Â Â certificate of material and etc as per your need.
3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.
4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.
5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.
6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
Polyethylene wax (PE WAX), also known as polymer wax referred to as polyethylene wax. Because of its excellent cold resistance, heat resistance, chemical resistance and wear resistance and has been widely used.
1. Used as excellent external lubricant in PVC profile, pipe, pipe fitting, foam board, WPC products ,etc. It has good late-period lubricating ability ,and will bring more glossy appearance and lower processing torque.
2. Used as efficient dispersant in masterbatch , filled masterbatch, modified masterbatch and functional masterbatch. It makes the products inorganic components and pigments dispersed better, and get more beautiful appearance .
3. Used as excellent external lubricant in PVC stabilizer , especially in Ca-Zn stabilizer. Additional use suitable inner lubricant, it will highly improve the overall effect of stabilizer and increase the cost-effective correspondingly.
4. Used in hot melt adhesives can better adjust the products viscosity and hardness, improve its fluidity. .
5. Used in paint, coating and the road marking paint,its main performance is heat resistance, deforming ,leveling, anti-setting and dispersion. It can increase the products surface hardness, wear-resistance and anti-smearing properties.
6. Used as modifier in paraffin wax, and improve the paraffin`s melting point , crystallinity ,etc.
7. Used as releasing agent and protective agent in rubber .
Pe Wax Powder,Olyethylene Wax Powder,Pe Wax For Plastic Additives,Pe Wax High Density
Hengshui Yimei New Material Technology Co.,Ltd , https://www.yimeipewax.com