Floating beneficiation is the same as other mineral processing methods. It is necessary to prepare the materials before the sorting, that is, the ore should be graded by grinding to achieve the concentration fineness suitable for floating beneficiation. In addition, there are several basic operations for floating beneficiation.
(1) The adjustment of pulp and the addition of floating ore dressing agent are aimed at causing the difference in the surface properties of the mineral, that is, changing the wettability of the mineral surface, adjusting the selectivity of the mineral surface, so that some mineral particles can adhere to the bubble, and Some can't be attached to air bubbles.
(2) Stirring and causing a large amount of air bubbles by means of the aeration stirring action of the floating concentrator, causing the air in the slurry to be dispersed to form a large number of bubbles, or to cause the air dissolved in the slurry to form microbubbles.
(3) The mineralized ore particles of the bubbles selectively adhere to the bubbles, which is the most basic behavior in the floating beneficiation process.
(4) The formation of the mineralized foam layer and the scraping of the mineralized gas bubbles rise from the lower part of the floating ore dressing tank to the mineralized foam surface to form a mineralized foam layer, and the useful minerals are enriched into the foam, which is scraped out to become a concentrate (middle mine) product. The non-target minerals remain in the floating ore dressing tank for sorting purposes. Generally, the minerals floating in the floating beneficiation operation are useful minerals. Such a floating beneficiation process is called positive floating beneficiation. Conversely, the floating ore dressing mineral is a gangue, which is called anti-floating beneficiation (or inverse floating beneficiation).
Precautions for maintenance of electrical system of XCMG loader:
When repairing the electrical system of the machine, please strictly abide by the following items. Otherwise, a little carelessness may turn a small problem into a major accident and cause greater economic losses. When repairing, please cut off the power of the host before disconnecting the wires and connectors, otherwise it will cause damage to the wiring harness, fuse fuse, and sometimes even a fire caused by a short circuit of the wire. Correctly identify the wire mark of the wire. Each wire on the wire harness corresponds to a one- or two-digit wire mark. Please pay special attention to distinguish "3" from "8", "6" from "9", and "5" With "6", "0" and "8", "1" and "7" and other numbers, so as not to misunderstand and bring you unnecessary trouble.
SEM 50F, 650 electrical system,
Liugong loaders ZL50CN, 855N, 856 electrical system,
SDLG 956L 952H 953 electrical system,
XCMG electrical system LW500KL ZL50GN,
Komatsu WA380, WA380-3, WA380-5, WA430-5 electrical system
DEGONG loader electrical system
Foton Lovol Loader electrical system
Lonking 855N loader electrical system
XGMA 932 936 956 Loader electrical system
Changlin Loader electrical system
And we have more.
Electrical System,Wheel Loader Dashboard,Xgma Roller Coil Valve,Custom Electrical System
Shandong Tianfu International Trade Co.,Ltd. , https://www.tfloaderparts.com