Technical Index:
Depth of Nitrated Layer:0.5~0.8mm
Hardness of nitration: 950~1100Hv
Fragility of nitration: Less than grade 1
Surface Hardness of Nitrated Cr coating layer: 950Hv
Hardness of Bimetallic Layer: HRC55~72
Thickness of Cr-coating Layer: 0.03~0.08mm
Depth of Bimetallic Layer:>2mm
Material :quality alloy steels
1.38CRMOALA
2.SKD61
3.stainless steel
4. BimetallicÂ
Supply Capacity:
Production Capacity: 1500 sets/monthÂ
Packing: Fumigation wooden caseÂ
Delivery Date: 30~40 days
The product specification
Screw: 15 mm in diameter-250 mm diameter screw
Screw length: 300 mm to 8000 mm screw length
Machine tube diameter 40 mm to 400 mm: barrel outer diameter
Length-diameter ratio: L/D: 10-46
Product Display
Equipment Display
Packing&Delivery
Contact Us
Â
Technical Index:
Depth of Nitrated Layer:0.5~0.8mm
Hardness of nitration: 950~1100Hv
Fragility of nitration: Less than grade 1
Surface Hardness of Nitrated Cr coating layer: 950Hv
Hardness of Bimetallic Layer: HRC55~72
Thickness of Cr-coating Layer: 0.03~0.08mm
Depth of Bimetallic Layer:>2mm
Material :quality alloy steels
1.38CRMOALA
2.SKD61
3.stainless steel
4. BimetallicÂ
Supply Capacity:
Production Capacity: 1500 sets/monthÂ
Packing: Fumigation wooden caseÂ
Delivery Date: 30~40 days
The product specification
Screw: 15 mm in diameter-250 mm diameter screw
Screw length: 300 mm to 8000 mm screw length
Machine tube diameter 40 mm to 400 mm: barrel outer diameter
Length-diameter ratio: L/D: 10-46
Product Display
Equipment Display
Packing&Delivery
Contact Us
Â
Advertising Aluminum Die Casting Frame FEATURES:
In this process metal is forced into the mold at a high pressure that ensures production of identical parts, a better surface finish, and an increased dimensional accuracy. Some parts produced by die casting even do not require machining after casting, or may require only a light machining to achieve the desired dimensions. Defects of porosity are found more often in large castings because of entrapped air and the solidification of melt before it reaches the boundaries of the cavity. Parts with a uniform wall thickness can be more accurately produced by die casting. Die casting molds are expensive since these are made from hardened steel and because a longer time duration is required for their production.
• Extremely smooth surfaces
• Excellent dimensional accuracy
• Rapid production rate
Advertising Aluminum Frame,Ultra Wide Aluminum Frame ,Advertising Led Light Box,Aluminum Die Casting Frame
Zheke Mould Technology Co. Ltd. , https://www.zkdiecasting.com