Brand New SDLG G9180 180HP Motor Grader Â
SDLG G9180 MOTOR GRADERÂ SPECIFICATIONS | |||
OVERALL DIMENSION | |||
Dimension | 8975x2710x3240mm | Min ground clearance of front axle | 610mm |
Ground clearance of rear axle | 430mm | Wheel tread | 2260mm |
Wheelbase | 6480mm | Center distance of balance box | 1538mm |
OVERALL PARAMETER | |||
Overall working weight | 15300kg | Max inclination angle of front wheel | ±18° |
Max swinging angle of front axle | ±16° | Max steering angle of front wheel | ±50° |
Steering angle of articulated frame | ±23° | Cutter diameter | 1626mm |
Cutter size(length*height*thickness) | 3962x635x25mm | Swing angle of blade | 360° |
Min turning radius | 7.6m | Lift height of blade | 445mm |
Cutting depth of blade | 787mm | Blade cutting angle | Forward 47°/backward 5° |
Blade side shift | Left 673mm / right 673mm | Max tractive force | 78kN |
Max speed ( forward/reverse ) | 38/23.6 km/h | -- | -- |
ENGINE | |||
MODEL | WP6G190E22 | Type | Inline, water cooled,dry cylinder liner,direct injection |
Rated power/speed | 140kW/2200r/min | Engine displacement | 6750ml |
Cylinder bore/stroke | 105/130mm | Min fuel consume ratio | 210g/Kw.h |
Max torque | 760Nm | Emission standard | Euro2 |
TRANSMISSION SYSTEM | |||
Transmission type | Fixedshaft power shift | Torque converter | Single stage single phase three element |
Gears | Six forward three reverse | Speed at forward gear I | 0-5km/h |
Speed at forward gear II | 0-9km/h | Speed at forward gear III | 0-11.5km/h |
Speed at forward gear IV | 0-19.5km/h | Speed at forward gear V | 0-23.6km/h |
Speed at forward gear VI | 0-38km/h | Speed at reverse gear I | 0-5km/h |
Speed at reverse gear II | 0-11.5km/h | Speed at reverse gear III | 0-23.6km/h |
HYDRAULIC SYSTEM | |||
Type | Open-type system | System pressure | 21Mpa |
FILL CAPACITY | |||
Fuel | 270L | Hydraulic oil | 132L |
Options | |||
Front blade | Equipped | Rear ripper | Equipped |
As a product of high speed, high efficiency, high accuracy and multiple purposes, G9180 is developed by SDLG on the basis of advanced technology of European, can be used for ground leveling and grooving, scraping slope, bulldozing, ploughing snow, loosening, compacting, material arrangement and mixing works, and is widely applied in construction operating condition of road, airport, defence engineering, mine construction, road construction, water conservancy construction and farmland improvement and so on.
3>Advantage:Â
- The perfect combination of Weichai engine and advance 6WG180 gearbox helps realize best capability and fuel efficiency. This product adopts high pressure gear pump and imported multi-way valve and double pump and two circuit hydraulic system, and the system pressure of whole machine can reach 21Mpa (competitors are only 18Mpa), thus improving the operating efficiency.
- It is applied with European advanced technology and equipped with the dual cylinder-driven pallet-type working device, helping to realize large driving force and high reliability. The cable can rotate with load and provide precise operation which is domestic industrial originated.
- Swing frame is made of lubrication-free and maintenance-free composite bearing, with small frictional coefficient, high reliability and is shock-proof and water-proof, hydraulic lock cylinder location is adopted and is easy to operate.
- This standard cab is fully sealed and safe and reliable, With wide visual field, operators can see the front wheel and the blade clearly thus to improve the operating precision.
- Electrical system of the entire machine has centralized control, three-stage alarm electronic monitoring system, digitalized stepping instrument display, high man-machine interaction and is convenient for detection and maintenance.
- Front wheel can tilt 18 degree which reduce the turning radius and improve operating flexibility of whole machine, when working on a slope, the front wheel will tilt to increase adhesion and improve stability for the whole machine. In addition, the tilting front wheel will offset side force from materials to the blade and prevent front wheel from sideslip.
5> Grader Options:
6> SDLG Production Map:
7> SDLG Factory:
 1> Specifications
Brand New SDLG G9180 180HP Motor Grader Â
SDLG G9180 MOTOR GRADERÂ SPECIFICATIONS | |||
OVERALL DIMENSION | |||
Dimension | 8975x2710x3240mm | Min ground clearance of front axle | 610mm |
Ground clearance of rear axle | 430mm | Wheel tread | 2260mm |
Wheelbase | 6480mm | Center distance of balance box | 1538mm |
OVERALL PARAMETER | |||
Overall working weight | 15300kg | Max inclination angle of front wheel | ±18° |
Max swinging angle of front axle | ±16° | Max steering angle of front wheel | ±50° |
Steering angle of articulated frame | ±23° | Cutter diameter | 1626mm |
Cutter size(length*height*thickness) | 3962x635x25mm | Swing angle of blade | 360° |
Min turning radius | 7.6m | Lift height of blade | 445mm |
Cutting depth of blade | 787mm | Blade cutting angle | Forward 47°/backward 5° |
Blade side shift | Left 673mm / right 673mm | Max tractive force | 78kN |
Max speed ( forward/reverse ) | 38/23.6 km/h | -- | -- |
ENGINE | |||
MODEL | WP6G190E22 | Type | Inline, water cooled,dry cylinder liner,direct injection |
Rated power/speed | 140kW/2200r/min | Engine displacement | 6750ml |
Cylinder bore/stroke | 105/130mm | Min fuel consume ratio | 210g/Kw.h |
Max torque | 760Nm | Emission standard | Euro2 |
TRANSMISSION SYSTEM | |||
Transmission type | Fixedshaft power shift | Torque converter | Single stage single phase three element |
Gears | Six forward three reverse | Speed at forward gear I | 0-5km/h |
Speed at forward gear II | 0-9km/h | Speed at forward gear III | 0-11.5km/h |
Speed at forward gear IV | 0-19.5km/h | Speed at forward gear V | 0-23.6km/h |
Speed at forward gear VI | 0-38km/h | Speed at reverse gear I | 0-5km/h |
Speed at reverse gear II | 0-11.5km/h | Speed at reverse gear III | 0-23.6km/h |
HYDRAULIC SYSTEM | |||
Type | Open-type system | System pressure | 21Mpa |
FILL CAPACITY | |||
Fuel | 270L | Hydraulic oil | 132L |
Options | |||
Front blade | Equipped | Rear ripper | Equipped |
As a product of high speed, high efficiency, high accuracy and multiple purposes, G9180 is developed by SDLG on the basis of advanced technology of European, can be used for ground leveling and grooving, scraping slope, bulldozing, ploughing snow, loosening, compacting, material arrangement and mixing works, and is widely applied in construction operating condition of road, airport, defence engineering, mine construction, road construction, water conservancy construction and farmland improvement and so on.
3>Advantage:Â
- The perfect combination of Weichai engine and advance 6WG180 gearbox helps realize best capability and fuel efficiency. This product adopts high pressure gear pump and imported multi-way valve and double pump and two circuit hydraulic system, and the system pressure of whole machine can reach 21Mpa (competitors are only 18Mpa), thus improving the operating efficiency.
- It is applied with European advanced technology and equipped with the dual cylinder-driven pallet-type working device, helping to realize large driving force and high reliability. The cable can rotate with load and provide precise operation which is domestic industrial originated.
- Swing frame is made of lubrication-free and maintenance-free composite bearing, with small frictional coefficient, high reliability and is shock-proof and water-proof, hydraulic lock cylinder location is adopted and is easy to operate.
- This standard cab is fully sealed and safe and reliable, With wide visual field, operators can see the front wheel and the blade clearly thus to improve the operating precision.
- Electrical system of the entire machine has centralized control, three-stage alarm electronic monitoring system, digitalized stepping instrument display, high man-machine interaction and is convenient for detection and maintenance.
- Front wheel can tilt 18 degree which reduce the turning radius and improve operating flexibility of whole machine, when working on a slope, the front wheel will tilt to increase adhesion and improve stability for the whole machine. In addition, the tilting front wheel will offset side force from materials to the blade and prevent front wheel from sideslip.
5> Grader Options:
6> SDLG Production Map:
7> SDLG Factory:
Â
Jining Union Machinery And Parts Co., Ltd. Is famous for Komatsu Hydraulic Pump Parts. We can supply many brand Hydraulic Pump Parts.
Our main model as follow:
PC50MR-2, PC56-7, PC60-5, PC60-7, PC60-8, PC70-8, PC110-7/-8, PC130-7/-8, PC160-7, PC200-7, PC200-8, PC220-7, PC220-8, PC270-7, PC200-8EO, PC300-7, 360-7, PC400-6, PC400-7, WA470-3, PC450-8, D85PX-15, PC650-8, WA500-6, D275AX-5, D575A-3, WA380-3, WA420-3, WA600-3, D375A-5.
Our pump parts is original pump parts made in Japan. We also can supply made in china quality pump parts.
Our Hydraulic Pump parts include pump cylinder block , piston shoe, retainer plate, valve plate, ball guide, cradle, support, drive shaft, etc.
All our parts we will give customer 6 months warranty period.
Hydraulic Pump Parts For Komatsu
Hydraulic Pump Parts For Komatsu,Komatsu Hydraulic Pump Parts,Hpv95 Hydraulic Pump Parts,Cylinder Block Valve Plate
JINING UNION MACHINERY AND PARTS CO., LTD. , https://www.vmpmachineryparts.com