Ce Corrugated Glazed Roof Tile Cold Wall Roof Forming Machine

Model NO.: WLFM17-182-1092
Type: Steel Tile Roll Forming Machine
Model Number: Wltm17-182-1092 Glazed Steel Tile
Applicable Occasions: Hotel,Villas,Country Club,Factories,Ect
Material: PPGI,PPGL,Pre-Painted Steel Sheet
Thickness: 0.3-0.7mm
Yield Stress: 235-345 MPa
Max.Forming Speed: 15-18m/Min
Total Motor Power: 11 Kw
Warranty: 1 Year
After-Sales Service Provided: Engineers Available to Service Machinery Overseas
Trademark: WILLING INT′L
Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
Specification: CE Standard, ISO 9001-2008
Origin: China R. P
HS Code: 84552210
High Quality Fast Steel Roof Tile Wall Panel Roll Forming Machine 
Ce Corrugated Glazed Roof Tile Cold Wall Roof Forming Machine

Components for the Machine:
The rollition driven forming stations, pressing die, cutting equipment, hydraulic station, PLC console and manual unload product run out table.

Ce Corrugated Glazed Roof Tile Cold Wall Roof Forming Machine

 
Material specification Aluminum, alu-zinc, galvanized and pre-painted galvanized steel.
Thickness 0.3-0.7mm.
Main motor power 5.5 kw.
Hydraulic station power 5.5kw.
Feeding width 1250mm.
Cover width 1092mm
Yield stress 235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed 15-18 m/min
3-4 m/minute (including step pressing and cutting)
Cutting Tolerance +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler Max. Capacity: 5000kgs.
Coil inner diameter 508mm.
Voltage 380V,3 Phase,50HZ,Or As per customer's request.
Numbers of stands 10 stations
Type of cutting Roll-formed and length-set profile cutting.
3. Material of Main Equipment:
Roller Material High grade S45C forged steel, coated with hard chrome.
Active Shaft Material High grade S45C carbon wrought steel, diameter 76mm.
Electric Elements PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter Blades Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.

Ce Corrugated Glazed Roof Tile Cold Wall Roof Forming Machine

Process Sketch:
Uncoiling →Infeed guiding →Roll forming →Pressing→Measure Length&Shearing →Sheet to Support Table

Packaging & Shipping

1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film; 
3.Spare parts and some small parts packed in plastic tooling box; 
4.All Components Fixed by steel wire with Container.

Ce Corrugated Glazed Roof Tile Cold Wall Roof Forming Machine

Company Profile
Ce Corrugated Glazed Roof Tile Cold Wall Roof Forming Machine

FAQ

  1. Q:Are you a manufacturer?
  2. A:Yes absolutely. Welcome a lot for your visiting to us.

  3. Q:What's the delivery time?

    A:Normaly will take 60days

  4. Q:Do you have after-sale support?

    A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 

  5. Q:Is there quality control when manufacturing the lines?

    A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.

  6. Q:What's your strength comparing to the other supplier?

    A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.

Motor End Cover

The die casting process involves the use of a furnace, metal, die casting machine, and die.

The metal, typically a non-ferrous alloy such as aluminium or zinc, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting parts.

The castings that are created in this process can vary greatly in size and weight, ranging from a couple of ounces to 100 pounds. One common application of die-cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.

Metal housings for a variety of appliances and equipment are often die cast.

Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Most home appliances also need lightweight and firm aluminum die casting parts, like bracket, heat dissipation module or structural support. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Motor End Cover,Washing Motor End Cover,Aluminum Engine Cover,Washing Machine Motor Cover

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.nbsunlee.com