Coal prices in Shanxi and Inner Mongolia have risen by a few kilometers


From today, the coal inspection officially kicked off, brewing for several days the coal price began to blitz bombing today, Shaanxi, Inner Mongolia coal prices started a full-scale mode, pull the coal driver is seriously blocked, some coal mine door pull Coal trucks exit the national highway for several kilometers.

Coal mines raise the price of coal

Yesterday, some coal mines in the Inner Mongolia region were inspected by the Coal Bureau. During the inspection, the coal mines required customers to transfer their long-distance vehicles from the gates of the mining area, and it was highly probable that they would be suspended.



Starting today, coal mines will begin to undergo inspections in an all-round manner, leading to the news that coal prices have risen today. As the two conferences approached, coal prices in Shaanxi and Inner Mongolia have been fully raised, and many traders have also started actively pumping coal, boosting coal mines several times in order to increase prices.

According to data monitoring by the Yulin Coal Trading Center: From February 26 to today, the number of mines in Yulin continued to increase, with a cumulative increase of RMB 40/ton. At present, the average price of coal at the end of the period is 504 yuan/ton, and the highest price is 520 yuan/ton; 3 to 8 blocks, the average price is 526 yuan/ton, and the highest price is 550 yuan/ton.

The freight rose to pull the coal car out of the national highway a few kilometers

With the rise of coal prices, freight rates have also risen. The downstream coal purchase is positive, but the upstream coal loading is severely impaired, and many drivers have low enthusiasm for receiving goods.


“Now it's too difficult to load coal in Inner Mongolia and Inner Mongolia. It can't be installed for at least 2 days at a time. It is not guaranteed to be loaded. Now that coal mines are starting to be checked, we may stop at any time. So even if the freight rate rises, we have to make specific calculations. Only consider the cost after the cost,” said a driver who often runs in Jiangxi.




Bar Tacking Sewing Machine

FOXSEW Bar Tacking Sewing Machines have all the types of Bartacking series, like Brother Type Bar Tacking Machine , Juki Type Bar Tacking Machine, Direct-drive Bar Tacking Sewing machine , etc- Different customers have different requirements, but FOXSEW can provide them correct machines, because FOXSEW knows customers well, knows market well. So, FOXSEW Bar Tacking sewing machines are popular with all customers from different countries !

Bar Tacking Sewing Machines


FX430 is the Brother Type Bartacking sewing machine, here we can provide customer Direct-drive model and Manual model, FX1850 is the Juki Type Bar Tacking Sewing Machine, Also we can provide 2 different model which is Direct –drive type, another is the Manual one. So, customers can know the details with FOXSEW by further discussion with FOXSEW People ! Welcome to FOXSEW to choose the Bar tacking sewing machines you need !

Bar Tacking Sewing Machines,Electronic Bar Tacking Sewing Machine, Computerized Bar Tacking machine

TAIZHOU FOXSEW SEWING MACHINE CO.,LTD. , https://www.chinafoxsew.com