Double Shafts Waste Aluminium Extrusion/Cans/Bars/Plates/Profile/Sheets Crushing Machine

Model NO.: FM-20-800
Cutter Material: Hard Alloy
Finished Surface: Gear Process
Compressive Strength (For Crushing): >300MPA
Tongs′ Features: Dedicated Tongs
OEM: Accepted
Trademark: FOTMA
Transport Package: Plastic Film
Specification: 5100*1200*2300mm
Origin: China
HS Code: 8477800000
Model NO.: FM-20-800
Cutter Material: Hard Alloy
Finished Surface: Gear Process
Compressive Strength (For Crushing): >300MPA
Tongs′ Features: Dedicated Tongs
OEM: Accepted
Trademark: FOTMA
Transport Package: Plastic Film
Specification: 5100*1200*2300mm
Origin: China
HS Code: 8477800000
Double Shafts Waste Aluminium Extrusion/Cans/Bars/Plates/Profile/Sheets Crushing Machine

Double shaft crushing machine is through the cut, tear and squeezing, reaching to decrease the size of raw material.

Aluminium crushing machine is used for cutting, crushing and recycling of aluminium extrusion, cans, bars, plates, profiles and sheets in a convenient manner. Our Aluminium Extrusion machine is made and designed by using quality approved materials under the strict supervision of professionals, as per the standards laid down by regulatory bodies. 

Aluminium crushing machineis widely used for waste aluminium extrusion, cans, bars, plates, profile and sheets. That has high production efficiency. The mechanized feeding way and high automation degree greatly reduce the labor intensity of workers and improve the working environment.
 
The working principle:
Spindle bearings on both sides of main shaft, through motor and reduction gear, rotary main shaft drives the spiral arrangement blades, make the blades on two shafts are meshing together, to tear, raw materials, and repeating this move to finished shredding. electronic control parts has a Reverse automatic control devices, when overfeeding or raw material is too big, Machine will inverted running and stop, avoid damage of blades or motor. To improve the service life and cutting ability, the main shaft through conditioning processing, and use high quality imported blades.
 
Product features:
1. The double shaft shredding machine adopts automatic control circuit, it has 4 control functions: start, stop, reverse and overload automatic inversion.
2. With a low speed, large torque and low noise.
3. The blade has many different materials: 9 Cr Si, SKD-11, 6cRw2Si, Cr12MoV, D2, W6, 55SiCr,
  high hardness, good wear resistance, more choices.
4. The main shaft after heat treatment, increase the rated torque.
5. Split type bearing technology design, can quickly and efficiently to replace bearings, blade.
6. Spiral arrangement blades, increase the service life of the equipment.
 
Technical parameters:
  Model Power(kw) Capacity(kg/h) Quatity of blades Inlet size(mm)
Blades diameters
Φ200*20
 
 
 		 FM-500 7.5-11 400-600 20 800*600
FM-600 7.5-11 500-800 22 800*600
FM-800 11*2 600-1000 30 1000*800
FM-100 15*2 700-1200 30 1200*800
Blades diameters
Φ200*20
 
 
 		 FM-800 15*2 800-1200 24 800*1200
FM-1000 22*2 1000-1500 30 1000*1500
FM-1200 22*2 1500-2000 36 1500*1800
FM-1500 30*2 2000-2500 48 1500*2000
Blades diameters
Φ400*40
 
 
 
 
 		 FM-800 15*2 1000-1500 18 800*1200
FM-1000 30*2 1500-2000 22 1000*1500
FM-1200 45*2 2000-3000 28 1500*2000
FM-1500 55*2 2500-3500 36 1500*2000

Photo:
Double Shafts Waste Aluminium Extrusion/Cans/Bars/Plates/Profile/Sheets Crushing Machine

  Double Shafts Waste Aluminium Extrusion/Cans/Bars/Plates/Profile/Sheets Crushing Machine

Double shaft crushing machine is through the cut, tear and squeezing, reaching to decrease the size of raw material.

Aluminium crushing machine is used for cutting, crushing and recycling of aluminium extrusion, cans, bars, plates, profiles and sheets in a convenient manner. Our Aluminium Extrusion machine is made and designed by using quality approved materials under the strict supervision of professionals, as per the standards laid down by regulatory bodies. 

Aluminium crushing machineis widely used for waste aluminium extrusion, cans, bars, plates, profile and sheets. That has high production efficiency. The mechanized feeding way and high automation degree greatly reduce the labor intensity of workers and improve the working environment.
 
The working principle:
Spindle bearings on both sides of main shaft, through motor and reduction gear, rotary main shaft drives the spiral arrangement blades, make the blades on two shafts are meshing together, to tear, raw materials, and repeating this move to finished shredding. electronic control parts has a Reverse automatic control devices, when overfeeding or raw material is too big, Machine will inverted running and stop, avoid damage of blades or motor. To improve the service life and cutting ability, the main shaft through conditioning processing, and use high quality imported blades.
 
Product features:
1. The double shaft shredding machine adopts automatic control circuit, it has 4 control functions: start, stop, reverse and overload automatic inversion.
2. With a low speed, large torque and low noise.
3. The blade has many different materials: 9 Cr Si, SKD-11, 6cRw2Si, Cr12MoV, D2, W6, 55SiCr,
  high hardness, good wear resistance, more choices.
4. The main shaft after heat treatment, increase the rated torque.
5. Split type bearing technology design, can quickly and efficiently to replace bearings, blade.
6. Spiral arrangement blades, increase the service life of the equipment.
 
Technical parameters:
  Model Power(kw) Capacity(kg/h) Quatity of blades Inlet size(mm)
Blades diameters
Φ200*20
 
 
 		 FM-500 7.5-11 400-600 20 800*600
FM-600 7.5-11 500-800 22 800*600
FM-800 11*2 600-1000 30 1000*800
FM-100 15*2 700-1200 30 1200*800
Blades diameters
Φ200*20
 
 
 		 FM-800 15*2 800-1200 24 800*1200
FM-1000 22*2 1000-1500 30 1000*1500
FM-1200 22*2 1500-2000 36 1500*1800
FM-1500 30*2 2000-2500 48 1500*2000
Blades diameters
Φ400*40
 
 
 
 
 		 FM-800 15*2 1000-1500 18 800*1200
FM-1000 30*2 1500-2000 22 1000*1500
FM-1200 45*2 2000-3000 28 1500*2000
FM-1500 55*2 2500-3500 36 1500*2000

Photo:
Double Shafts Waste Aluminium Extrusion/Cans/Bars/Plates/Profile/Sheets Crushing Machine

 

Industrial Fan Heater

as an expert industrial fan heaters factory, indunstrial heaters including PTC fan heaters, Ceramic fan heaters & Copper fan heaters

If you want to heat a small area or are offering spot heating in your garage, greenhouse or Garden, consider a Industrial Heater. You can also consider fan-forced heaters. industrial heater with IP24, it can be use outdoor and indoor. and the power is bigger than household use one. like 2kw, 3kw,5kw,9kw,12kw industrial fan heaters. more level of power for your choice.

Welcome to order industrial heater, first choice is industrila fan heaters.

thanks

Industrial Heater Blower,Industrial Electric Fan Heaters,Industrial Gas Heater Blower,Electric Blow Heaters Industrial

Fenry Manufacturing Co., Ltd , https://www.cnfenry.com