Eeconomical Small Plastic PVC Pipe fittings making machine

Model NO.: ST-225
Computerized: Computerized
Certification: CE, ISO9001:2008
Injection Rate: 145g/s-208g/s
Clamping Force: 2080KN
Power(W): 18.5KW
Injection Weight: 420G
Trademark: Sana-tory
Specification: CE
Origin: China
HS Code: 8477101090
Eeconomical Small Plastic PVC Pipe fittings making machine
 
Product Description:
                          ITEM UNIT                DATA
Injection
Unit		 Screw Diameter mm 45 50 55
Screw L/D Ratio L/D 23.1 20.6 18.7
Injection Volume cm3 374 461 558
Shot Weight g 340 420 508
Injection Pressure Mpa 210 170 141
Clamping
Unit		 Clamping Force KN 2080
Opening Stroke mm 475
Mould Thickness(Min-Max) mm 200-520
Space Between Tie-Bars mm 515×515
Ejector Force KN 62
Ejector Stroke mm 165
General Motor Power KW 18.5
Heater KW 18.6
Pump Pressure Mpa 16
Machine Dimension m 5.7×1.4×2.3
Machine Weight T 6.6
Mould Orientation Ring Diameter mm Φ160
Nozzle Radius mm SR15
 
Improve The Production Efficiency
 
Quick Response And High Efficiency
 
Injection molding machine to achieve maximum output in 0.05 s
 
50 rpm can be up to 140 bar
 
High Repeat Precision, Save Raw Materials
 
Repeated injection precision can reach <=3%
 
Pressure Is Stable, Improve the Quality Of Molding
 
Pressure fluctuation quantity is less than + / - 0.5 bar
Eeconomical Small Plastic PVC Pipe fittings making machine

Stable At Low Speed

 Closedloop control pressure and flow, at low pressure and low flow operation performance is particularly 

outstanding, shoot rubber speed in less than 1 mm/SEC without crawling, pulse, high stability. System according to the actual product process requirements, set arbitrary pressure and flow, avoid excess heat generation, the oil temperature relative to the traditional injection molding machine is stable. In addition, the pressure

 flow automatic compensation when motion, maintain the stability of the pressure and flow rate, high control accuracy and repeat precision.

Machine Service Life Longer And Cleaner Working Environment

Less Noise Emissions

Low Heat And Cooling Energy Demand Is Low, 

More Suitable For Production Environment With Air Conditioning

Injection molding machine boot into the steady-state oil temperature rise of 8°C to 10°C

Eeconomical Small Plastic PVC Pipe fittings making machine

Construction Scaffolding Parts

construction scaffolding parts,steel scaffolding parts,scaffolding spare parts,aluminium scaffolding system parts,scaffolding parts for sale,parts for scaffolding

Base jacks are usually made out of steel and are adjustable to various lengths. The adjustments are made based on the amount of weight it needs to bear. They can also be made in a variety of configurations, such as swivels that adjust to sloped ground.

For scaffolds that are built off other structures like steel beams, base plates can be replaced with shoring heads (U-heads, for example).

H052872188a2044acad5e9323aaefcdedx Png 960x960 Png




Construction Scaffolding Parts,Scaffolding Components,Basic Components Used in Scaffolding,Fundamental Parts of a Scaffold

NINGBO CITY YINZHOU RUICAN MACHINERY CO.,LTD , https://www.ruicanmach.com