Technical data:
| Fluid Pressure | Max 1.6MPa (232Psi) |
| Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, air |
| Body Material | CF8M/CF8 |
| Seals  Material |  EPDM/FKM |
| Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
| Fluid Temperature | -20ºC - +150ºC |
| Ambient Temperature | -20ºC - +80ºC |
| Control Type | Normally closed,Normally open,Double acting |
| Connection | Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000. |
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:
CONTACT US
Founded in 2001, we are specialized in design & manufacture stainless steel valve for industrial fluid control system. Our products include pneumatic angle seat valve, shuttle valve, ball valve, butterfly valve, pressure reducing valve, steam trap, check valve and strainer, which are widely exported to USA, Europe, Asia, Africa, in total 62 countries.Technical data:
| Fluid Pressure | Max 1.6MPa (232Psi) |
| Control Pressure | 0.3 - 0.8MPa(43.5-116psi) |
| Control Fluid | Neutral gas, air |
| Body Material | CF8M/CF8 |
| Seals  Material |  EPDM/FKM |
| Applicable Fluid | FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc. |
| Fluid Temperature | -20ºC - +150ºC |
| Ambient Temperature | -20ºC - +80ºC |
| Control Type | Normally closed,Normally open,Double acting |
| Connection | Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000. |
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:
CONTACT US
1. Stable structure: it adopts the classic 4-column and 3-beam structure, the medium carbon steel is thickened on the upper seat and the thickened and hardened columns ensure the structure is stable.
2. With a vacuum pump: before pressing the material, vacuum pump get work and get out of the air form material, which is convenient and make sure there are no bubble in the product.
3. Precision clamping: using technical plane pressure equalization correction, maximum pressure(200Kg) nut leveling device, can increase the parallelism of the upper and lower heating plates to 0.05mm.
4. Precise temperature control: adjustable from room temperture to 400℃,using intelligent temperature control the temperature fluctuation range within ±2℃
5. Easy to operate: PLC combined with touch screen, whether it is debugging or production can be operated directly and easily.
6. Easy to adjust the pressure: there is a botton below the PLC screen and you can adjust the adjust the pressing pressure by hand easily and visually, which is convenient when you want to press some flexible pattern, like cotton and the pad.
Silicone Heat Transfer Label Mahcine
Silicone Heat Transfer Label Machine,Silicone Heat Transfer Moulding Machine,Silicone Making Machine
Dongguan Jinyu Automation Equipment Co., Ltd. , http://www.jinyumachinery.com