According to insiders of Sinopec Lubricant Sales Company, Great Wall Lubricant Company brewing will continue to increase the sales price of lubricants around January 25, 2011, with an increase of around RMB 500/ton. The price adjustment time was only less than two months from the last time on December 1, 2010, and the previous adjustment ranged from RMB 200-500/ton.
The source said that despite the current poor market demand for lubricants, but the base oil market prices have continued to rise since November 2010, the cost of lubricants rose rapidly, so the Great Wall Lubricants sales company continues to increase the price of lubricants.
However, due to the end of the winter oil change season, the domestic market demand is in a weak consumption state, and the short-term market will not be affected much. A distributor of lubricants in the East China Market also stated that the current base oil prices remain high and that the reconciliation plant is also shutting down as early as possible. It is expected that the impact of this price adjustment will be performed after years.
SF-200 is a Hand belt type resistance Forming Machine which is the best selection for mass production.Easy adjustment,operation and long life.
SF-201 is the same as SF-200,Beside above ,they are Loose Tape resistance Former suitable for vertical or horizontal shaping of resistors and diodes.
SF-202Component bending forming machine is bulk, with resistance and diodes are available.Foot cutting, bending can be strengthened, foot long span can be adjusted.
SF-208FB Axial automatic resistor machine has three Models for Processing Different Type of Packing.
SF-206 The bulk Resistor Former has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.
SF-208 Equipment K Type Resistance Molding Machine has three Models for Processing Different Type of Packing.â‘ Loose packed Model(SF-208-FA).â‘¡Taped Model(SF-208-FB).â‘¢ Loose packed/taped combinative Mode(SF-208-F).
SF-206MB The axial lead former m type has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.It is also means automatic resistor forming m machine.
Resistance Molding Bending Machine,F Resistor Cutting Machine,Component Cutting Forming Machine,Components Lead Cutting Machines
SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.szsingsunautomatic.com