JH-11BÂ Automatic Nozzles are designed specially for self-service pre-pay of card-lock system to help prevent gasoline spills.
The JH-11B nozzle can't be open until the pumping system is pressurized and closes automatically when the pressure is removed. This means the JH-11B is closed when placed back to the dispenser. Accurate flow ontrol allows your customers to top off their tank to the exact amount they want, and it's easy to stop gasoline flow precisely.
| Inlet Thread : | BSPF/NPTÂ 3/4" |
| Diameter of spout : | 13/16" &Â 15/16" |
| Color of insulator: | red/green/blue/yellow/black |
| MOQ | 10pcs |
| Package: | 10pcs/carton |
| Net Weight: | 13kg |
| Gross Weight : | 14kg |
| Dimension: | 420×340×400mm |
Oil inlet: NPT3/4", BSPT3/4".Â
Oil outlet: 15/16", 13/16 ".Â
Flux range: 0-60L/min or 0-45L/min.Â
Nominal pressure: 0.18MPa.Â
Self sealing time: 0.1s (max).Â
Features:Â
Automatic nozzles for diesel, kerosene and all kinds of gasoline service.Â
Easily replaced spout simply removes the screwÂ
Spout kits availableÂ
Low-profile aluminum body: Light weight, easier to handle, provides an attractive, image-enhancing appearanceÂ
Vacuum design: Back-sealing designÂ
Selective casting process of bodyÂ
Sand casting technique or high-pressure castingÂ
Technique. High-pressure casting technique can reduce diesel foaming and static electricityÂ
Hold-open rack is available for full service applicationsÂ
One-hand control means easy setting to flow rate for customer's convenienceÂ
Full hand insulator protects both nozzle and vehicle, and insulates user's handsÂ
Available colors: Color chart on inside back coverÂ
Selective splash guardÂ
100% factory tested
| Body | aluminum |
| Seals | Buna-N, biton |
| Main stem seals | viton cased oil seal / graphite with Teflon |
| Main stem | stainless steel |
Sample Shipping:
By express (DHL, FedEx, UPS, etc.)
Sample's lead time: 2-5 daysÂ
Mass productions' lead time: 7-15Â daysÂ
By sea shipping when bulk order
Company Information:
Wenzhou Jiahao Petroleum Machinery Co.,Ltd. is a professional manufacturer of petroleum machinery products since 2010, which is located in Wenzhou, China. The main products are Oil Nozzle&Adblue Nozzle Series, including Automatic Fuel Nozzle, Manual Nozzle, Plastic Chemical Nozzle, Vapor Recovery Nozzle, Fuel Nozzle with Flowmeter, Adblue Nozzle, etc; Flow meter Series, including Turbine Type Flow Meter, OGM Type Flow Meter, Mechanical Flow Meter, Electronic Oval Gear Flow Meter, etc; Fuel Pump Series, including AC/DC self-priming Pump, Electronic Fuel Transfer Pump, Fuel Transfer pump Assy; Fuel Dispenser Series, including Mobile Fuel Dispenser, Mechanical Portable Fuel Dispenser and there fuel dispenser components.Â
As one of the best quality and professional manufacturer in petrol equipment field, Jiahao has got international ATEX certificate and quality management system certificate ISO9001:2008. Based on the advanced equipment ,abundant technique and modernized management , we have established a line of research, development and sufficient production capacity . We have a experienced team of workers and excellent QC numbers who can strictly control each step of production process , all of these make our quality reliable and in good quality. Jiahao's products are exported to many countries, such as South East Asia, Middle East, Europea, Russia, USA, etc. Customers' OEM&ODM requirements are available for us. 
FAQ:Â
Q: Are you a manufacture or a trading company?
A: We are a manufacture of kinds of fuel nozzle, adblue nozzle, flow meter, fuel pump&other fuel dispenser accessaries.
Q: Where is your factory located? How can I visit there?Â
A: Our factory is located in Wenzhou, Zhejiang, China. All our clients, from home or abroad, are warmly welcomed to visit us!
Q: Can I get some samples? Could be 1 pc sample free?
A: We are honored to offer you samples for test. Sample fee of 1pc still needs to be collected, but could be deducted in the future order.
Q: How does your factory do quality control?Â
A: Quality is priority. Each of our product will be inspected strictly by our prefessional workers before delivering. We have got ISO9001:2000 certificate and SGS certificate.
Q: What's your delivery time?
A: It depends on your quantity, usually 3-7 days.Â
Q: What kind of certificate do you have?
A: ISO 9001:2008&Atex certificate. 
Please kindly click below for more information.(inquiry) Why not!
Product Description
Grain cleaning machine Gravity Stone Remover
after raw material cleaning in grain processing plants, to grading grain, concentrate to clean impurities, (such as blighted wheat, small corn cobs, etc.) and to remove sand, mud. It use wind, vibrating and sieving effect matching technology, to be high efficiency, great performance on grading and separating gravel, mud pieces, low power consumption, no dust leakage, low noise, easy operation and maintenance.
Features
1. Advanced design and excellent fabricating
2. Reliable and excellent stone separation and efficient cleaning
3.High specific capacity
4. Easy operation and maintenance
5. Two options: with or without air-recycling system.
6. A fan is equipped on the air-recycling type and a special separator is installed ahead of the fan. The separator deflects the aspirated air through a lamellar system so that dust and chaff are separated from the air and dischar
ged by an airlock valve while the cleaned air is recycled by the fan in the air return pipe to the destoner
Application
1.The machine is designed for separating stones from a continuous product stream
2.On the basis of differences in specific gravity, reliable removal of highdensity impurities such as stones and pieces of metal and glass is achieved.
3. Versatile application in flour mills, rice mills, feed mils and seeds selection processing.
Principle
1.The sieve box which is normally equipped with two layer sieves is supported by hollow rubber springs and is caused to oscillate by one or twovibrators depending on machine execution.
2.The grain is spread by a feeder across the entire width of the machine, and then the product stream is stratified on the pre separation screen according to its specific gravity by the oscillating motion of the screen and by the air flowing through the product from bottom to top. The light particles collect at the top, and the heavy ones including the stones at the bottom.
3.The lower layer with the heavy particles flows upward and is fed to the final separation zone of the bottom de-stoning screen. Final separation of the stones from the grain is accomplished by a countercurrent of air.
4. The stone free product streams on the two screens float on cushions of air, flowing slowly toward the product outlet, and then are discharged through the squeezed rubber valves.
5. To achieve the optimum degree of separation, the inclination of the screens, the air volume and final separation can be adjusted accordingly.
The process of flour milling:
The process of flour milling (from corn to milled into corn flour) usually consists of the following:
1. corn storage (silos, or warehouse)
2. cleaning system (sifter, destoner, seprater, magnet, scourer, etc)
3. dampening (dampener, conditioning silos, etc)
4. milling system (roller mill, plansifter, purifier, impact detacher, etc.)
5. Flour pressure and blending system (if need)
6. flour packing and stacking
DingZhou YongSheng Grain and Oil Machinery Co., LTD is a professional company combining research and development design, production and sales as a whole. The company has first-class oil equipment manufacturing base, professional oil technology engineer and professor, possesses advanced production technology and sophisticated equipment, All the mechanical parts are manufactured by our company.
The complete sets of oil equipment that we manufactured, relying on many domestic scientific research institutions. Advanced technology, suitable for making all kinds of plant oil. From the raw material of cleaning up, prepressing, leaching, refining and the production processing of by-product (such as Phospholipids engineering, protein engineering), is totally a dragon design and production, has created considerable economic benefit and social benefit for the user and society more than 40 years. Company new development of biodiesel equipment technology in recent years, has put dozens of sets on the market, obtaining good economical benefits both In the domestic and overseas. At present, we have hundreds of successful installation operation of the oil equipment engineering experience, can design and product according to the difference of the user's economic condition. raw material. regional, install oil equipments.
YongSheng comapny with scientific management method, strives for perfection the manufacturing process, innovative manufacturing idea, fast grows and become the grain and oil machinery production and export base in China. Company products are exported to Russia, India, Nepal, Indonesia, South Africa,Tanzania,Ethiopia,Ukraine, kazakhstan, Pakistan, Iran, north Korea, Vietnam, France and the European Union and so on more than 30 countries and area.
Stone Remover Machine / Destoner
Grain Destoner,Grain Stone Removing Machine,Seed Cleaning Machine,Grain Destoner Gravity Machine
Hebei Huipin Machinery Co.,LTD , https://www.oilpresschina.com