Technical Parameter: 50Hz
Flow: 2 - 160m3/h;
Head: 24 - 1000m;
Power: 1.1 - 110kw;
Speed: 2900r/min;
Calibre: 25-150mm;
Temperature range: -15ºC - +120ºC.
Range of Application:
1. Water supply for domestic
2. Fire control purposes in high-rises
3. Transportation of circulating cold water in air- conditioning system.
Product Introduction:
This pump is the latest type, which is characterized by energy saving, space effective, easy installation, stable performance and so on. The casing is made of 1Cr18Ni9Ti top-grade stainless steel while the shaft gland adopts the abrasion-resistance mechanical seal with zero leakage and a long serice life. It solves the axial force with the hydraulic balance so that the pump has stable running with low noise. Its installation conditions are more favorable than those of DL pump because it can be easily installed in the middle of a segment of horizontal pipeline. It can fully meet the need for the water supply and drainage of high-rise buildings, deep wells and mines and the like as well as for the fire fighting facilities. Therefore, it is the optimal type to transport cold and hot water, general media or other liquids with similar physical and chemical properties as water in all major industries.
Type Designation:
50 GDL 12 - 15× 5
50 - Diameter of pump inlet and outlet (mm)
GDL - Vertical Multistage Pipeline Pump
12 - Flow capacity (m3/h)
15 - Lift head of single-stage (m)
5 - Stage number
Purpose:
  DL vertical multistage centrifugal pump can widely used to high-rise fire fighting, urban supply, air-conditioning circulating unit and cooling water transported.
Structure:
Â
| NO | Components | Remark |
| 1 | Vertical motor | Â |
| 2 | Motor base | Cast iron |
| 3 | Roll bearing | Â |
| 4 | seal | Stuffing or mechanical seal |
| 5 | Above bearing | Brassiness |
| 6 | Tighten bolts | 45#steel |
| 7 | Outlet section | Cast iron |
| 8 | Stable key | 45#steel |
| 9 | Â | Cast iron |
| 10 | impeller | Cast iron |
| 11 | Paper packing | Â |
| 12 | Middle section | Cast iron |
| 13 | Seal ring | Â |
| 14 | Shaft | 45#steel |
| 15 | Impeller nuts | Brassiness |
| 16 | Lower bearing | Brassiness |
| 17 | Lower shaft sleeve | 2Cr13 |
| 18 | Seal pad | Â |
| 19 | Hole gland | Cast iron |
| 20 | Tighten bolts | Â |
| 21 | Inlet section | Cast iron |
Â
Technical Parameter: 50Hz
Flow: 2 - 160m3/h;
Head: 24 - 1000m;
Power: 1.1 - 110kw;
Speed: 2900r/min;
Calibre: 25-150mm;
Temperature range: -15ºC - +120ºC.
Range of Application:
1. Water supply for domestic
2. Fire control purposes in high-rises
3. Transportation of circulating cold water in air- conditioning system.
Product Introduction:
This pump is the latest type, which is characterized by energy saving, space effective, easy installation, stable performance and so on. The casing is made of 1Cr18Ni9Ti top-grade stainless steel while the shaft gland adopts the abrasion-resistance mechanical seal with zero leakage and a long serice life. It solves the axial force with the hydraulic balance so that the pump has stable running with low noise. Its installation conditions are more favorable than those of DL pump because it can be easily installed in the middle of a segment of horizontal pipeline. It can fully meet the need for the water supply and drainage of high-rise buildings, deep wells and mines and the like as well as for the fire fighting facilities. Therefore, it is the optimal type to transport cold and hot water, general media or other liquids with similar physical and chemical properties as water in all major industries.
Type Designation:
50 GDL 12 - 15× 5
50 - Diameter of pump inlet and outlet (mm)
GDL - Vertical Multistage Pipeline Pump
12 - Flow capacity (m3/h)
15 - Lift head of single-stage (m)
5 - Stage number
Purpose:
  DL vertical multistage centrifugal pump can widely used to high-rise fire fighting, urban supply, air-conditioning circulating unit and cooling water transported.
Structure:
Â
| NO | Components | Remark |
| 1 | Vertical motor | Â |
| 2 | Motor base | Cast iron |
| 3 | Roll bearing | Â |
| 4 | seal | Stuffing or mechanical seal |
| 5 | Above bearing | Brassiness |
| 6 | Tighten bolts | 45#steel |
| 7 | Outlet section | Cast iron |
| 8 | Stable key | 45#steel |
| 9 | Â | Cast iron |
| 10 | impeller | Cast iron |
| 11 | Paper packing | Â |
| 12 | Middle section | Cast iron |
| 13 | Seal ring | Â |
| 14 | Shaft | 45#steel |
| 15 | Impeller nuts | Brassiness |
| 16 | Lower bearing | Brassiness |
| 17 | Lower shaft sleeve | 2Cr13 |
| 18 | Seal pad | Â |
| 19 | Hole gland | Cast iron |
| 20 | Tighten bolts | Â |
| 21 | Inlet section | Cast iron |
Â
What is the role of an Alligator Shear Machine in metal recycling?
The Alligator Shearing Machine which is commonly used in metal fabrication and scrap metal recycling to cut a range of metal items including pipes, bars, and even profile steel such as I-beams.
Each machine can be controlled manually or automatically.
The Alligator Shear Machine is easy to operate, safe and reliable, and can adapt to a variety of different environments.
How to choose a suitable Alligator Shear Machine?
Q43 series alligator shear is the ideal machine for shearing reinforcing bar, mild steel round bar, aluminium, copper, steel tubing, lead, cable and most other hard metals.
With the hold-down clamp device, to prevent material from kicking back and guarantee maximum operator safety, and do the shearing jobs most efficiently and safely.
We provide a variety of models of alligator shear, with various blades sizes for options, which support different working environments.
Q43-Alligator Shear (Integral structure design)
Q43-Alligator Shear (Split structure design)
YMSRECYCLING's wide range of Hydraulic Alligator Shear is designed for scrap yards and various industrial cutting applications.
These types of equipment can be customized and extended according to the actual needs of customers on-site.
YMSRECYCLING also offer economical and effective solutions to help you to process different scrap metal.
Please provide your requirements in consultation.
CONTACT US
Contact Us for the Best Recycling Solution
Sales Department: +86-15950122559 (Mr. Jack Zhou)
At YMSRECYCLING, our team of specialists is dedicated to providing you with the best solution for your recycling needs. From production rates to running costs and briquetting technologies, we will work with you to ensure your requirements are met. Contact us now to get started.
Scrap Metal Shearing Machine,Alligator Shear,Metal Cutting Machine,Hydraulic Alligator Shear,Alligator Shearing Machine
Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com