The jaw crusher occupies an important place in the stone production line, and the jaw crusher is used to cover the environment jaw crusher. Stone production line: The stone production line is composed of vibration rupture, jaw crusher, hammer crusher, vibrating screen, tape conveyor, meeting electric control and other equipment. Various types of equipment are combined to hold the jaw crusher. The closed loop is formed multiple times; the large stone material silo is sent to the jaw crusher by the vibrating feeder symmetrically to hold the coarse crush.
In order to make the jaw crusher work better, it should avoid the following irregularities in the operation of the jaw crusher, so as to avoid damage and prolong the service life of the machine.
The maintenance of the machine is carried out from time to time. In the use of the jaw crusher, the screws of the internal parts of the machine or the screws of the fixed machine are often loosened due to the great force of the machine. This requires regular reinforcement of the machine's screws.
Second, do not promptly replace the lubricant with the machine. After the machine has been in use for a period of time, the internal lubricant will reduce the lubrication effect, and the debris that falls off during the running of the machine will also increase the wear of the machine. Therefore, when the lubricant has been used for a while, it must be replaced in time. The use of coal and oil in the replacement of the interior completely cleaned up, do not let a little debris left behind. This way the machine is not easy to wear.
Third, the internal temperature of the machine is too high. Jaw crusher generates a lot of heat due to friction during use. If this heat is not released in time, it will damage the machine. For example, the center axis of the machine will be deformed due to high temperature and will be damaged when the stone is broken. Therefore, always pay attention to the internal temperature when using the crusher. If the machine temperature is too high, stop the work in time, and then use it when the temperature is reduced.
Fourth, when added to the feed which is not picked iron block. If the iron is in the raw material, the jaws of the jaw crusher will be destroyed. Causes the machine not to be able to use.
5. Add raw materials unevenly. This will damage the machine due to excessive load when too much material enters the machine.
Propylene glycol is an important raw material for unsaturated polyester, epoxy Resin, and polyurethane resin. The amount in this area accounts for about 45% of the total consumption of propylene glycol. This unsaturated polyester is used in large quantities for surface coatings and reinforced plastics.
Propylene Glycol,Mono Propylene Glycol,PG 99.5%
HENAN JINHE INDUSTRY CO.,LTD , https://www.hntitaniumdioxide.com