Applications:
Electroplating, plastic products, hardware, chemical industry, electronics, food preservation,
Laser carving, vacuum coating, ultrasonic cleaning etc industries.
Chiller that uses high effective a easy cleaning stainless steel heat exchanger, exerts its
Unique advantage against erosion and filth in electroplating, PCB, oxidization, chemical
Industry, etc weak acid and alkaline conditions.
Spare parts introduction:
Packaged -type chiller including water pump and water tank. Client can choose with or without water pump and water tank.
Compressor: Hitachi, Daikin, Danfoss, Copeland, client can choose the compressor
Water cooled type: Condenser and evaporator use Shell-and-tube.
Air cooled type: Shell-and-tube condenser, finned type evaporator
Safety production Device:
Besides the features of tank water-cooled machine set, air blast cooling chiller does not need extra cooling water tower and is easy to install and operate so that it is suitable for small production equipments.
Phase reversion protection, Phase lack protection, overload current protection, discharge air temp. Protection, low &high pressure protection.
Function:
Refrigerant: R22/R407c/R134, client can choose the refrigerant/gas.
Cooling only unit/cooling-heating unit,
1. Adopt the advanced scroll compressor, resistance low temp and high efficiency
2. Electrical configuration adopt high quality product of the world to ensure that the unit stable quality and reliable operation.
3. Equipped with high-performance low temp freezing pump and stainless steel water tank
4. Adopt the glycol antifreeze as the cooling agent, freezing water temp can be controlled at -25 degrees Celsius.
5. Customer may request calcium chloride as an antifreeze.
| Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Industrial Water Chiller | |||||||||||||
|   Model HLLW ~ | 03SPI | 05SPI | 08SPI | 10SPI | 12.5SPI | 15SPI | 20DPI | 25DPI | 30DPI | 40TPI | 45TPI | ||
| Â Rated Cooling Capacity |
×1000 kcal/h | 8.8 | 14.1 | 22.9 | 30.4 | 35.4 | 44.7 | 60.7 | 70.9 | 89.4 | 106.3 | 134.1 | |
| KW | 10.2 | 16.4 | 26.6 | 35.3 | 41.2 | 52.0 | 70.6 | 82.4 | 104.0 | 123.6 | 156.0 | ||
| Â Input Power (KW) | 2.85 | 4.3 | 6.3 | 7.9 | 9.3 | 11.7 | 15.1 | 17.1 | 22.6 | 25.6 | 32.8 | ||
|  Comp. Input Power×Qty. (KW) | 2.1 | 3.55 | 5.2 | 6.8 | 7.8 | 10.2 | 6.8×2 | 7.8×2 | 10.2×2 | 7.8×3 | 10.2×3 | ||
| Â Chillded Water Pump Model | HT1.0DK-20 | HT1.0DK-20 | HT40-15 | HT40-15 | HT50-17 | HT50-17 | HT50-17 | HT50-17 | HT65-19 | HT65-19 | HT65-19 | ||
|  Chilled Water Pump Power (KW) | 0.75 | 0.75 | 1.1 | 1.1 | 1.5 | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 2.2 | ||
| Â Comp. Current (A) | 5.3 | 8.4 | 12.6 | 16.2 | 18.1 | 22.8 | 31.1 | 33.4 | 44.2 | 50.2 | 64.2 | ||
|  Power Supply | 3φ-380V-50HZ | ||||||||||||
|  Safety Protection | Phase reversion protection, Phase lack protection, Overload current protection, Discharge air temp. protection, Low & High pressure protection, Low temp. protection, Water flow protection, |
||||||||||||
| Â Number of Refrigeration Circuit | 1 | 2 | 3 | ||||||||||
| Â Capacity Control (%) | 0, 100 | 0, 50, 100 | 0, 33, 66, 100 | ||||||||||
| Â Refrigerant | R22 | ||||||||||||
| Â Condenser | Â Shell and Tube Type | ||||||||||||
| Â Water Side Max Pressure (MPa) | 1 | ||||||||||||
| Â Dia. of Pipe to Condenser (inch) | 1" | 1-1/2" | 1-1/2" | 1-1/2" | 2" | 2" | 2" | 2" | 2-1/2" | 2-1/2" | 2-1/2" | ||
| Â Cooling Water Flow (L/m) | 35.3 | 57.2 | 91.2 | 120.6 | 140.5 | 178.3 | 225.3 | 257.4 | 355.4 | 386.1 | 533.1 | ||
| Â Condenser Water Pressure drop (kPa)Â | 21 | 22 | 23 | 29 | 31 | 41 | 56 | 56 | 58 | 55 | 56 | ||
| Â Evaporator | Pipe Coil Type | Â Shell and Tube Type | |||||||||||
| Â Water Side Max Pressure (MPa) | - | 1 | |||||||||||
| Â Â Dia.of Pipe to Evaporator (inch) | 1" | 1" | 1-1/2" | 1-1/2" | 2" | 2" | 2" | 2" | 2-1/2" | 2-1/2" | 2-1/2" | ||
| Â Chilled Water Flow (L/m) | 29.2 | 47.0 | 76.4 | 101.2 | 118.1 | 149.1 | 202.4 | 236.2 | 298.1 | 354.3 | 447.1 | ||
| Â Evaporator Water Pressure drop (kPa) | - | 17 | 23 | 28 | 30 | 28 | 28 | 32 | 32 | 31 | |||
| Â Running Noise dB(A) | 54 | 56 | 66 | 72 | 72 | 75 | 75 | 75 | 75 | 75 | 75 | ||
| Â Tank Volume (L) | 80 | 80 | 180 | 180 | 180 | 180 | 270 | 270 | 270 | 270 | 270 | ||
| Â Total weight (Kg) | 120 | 160 | 430 | 460 | 500 | 540 | 720 | 780 | 880 | 1030 | 1180 | ||
|  Dimension L×W×H | 850×550×1050 | 1400×850×1180 | 1600×850×1180 | 2000×950×1180 | 2000×1000×1180 | 2400×1050×1280 | |||||||
What are Pipe Fusion Machines? and How do Butt Fusion Welding Machines work? Butt Fusion/ Heat Fusion is mainly for welding of plastic pipes and fittings made of HDPE, PP, PVDF. Pipe Thermofusion Machines are used in the construction, mining, oil and gas, water and sewerage industries etc,which are also called Field Butt Welding Machines. HDPE Pipe Butt fusion welding is a type of hot plate welding for thermoplastic pipes,Butt-fusion is a sensitive process, which is why all fusion parameters have to be coordinated to create a homogenous joint with consistently high welding quality. The butt welding machines used to weld PE pipes have controls to ensure the welding parameters are strictly adhered to. The following parameters are controlled:
♦heater plate temperature
♦ovality and alignment
♦interface pressure
♦bead width
♦heat soak time
♦changeover time
For Yuda RDH series Hydraulic Butt Fusion Machines, you can choose data logger to control these welding parameters. For Yuda RDH-A Series CNC Poly Pipe Butt Welding Machine, The CNC Welding system control these welding factors itself. Recently DVS2207 and ISO21307 welding standards input in data logger or cnc control system already.
HDPE Pipe Fusion Machine,Plastic Fusion Welding,Poly Pipe Fusion Machines,HDPE Pipe Welding Machine
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionwelding.com