Iron ore is the magnetic characteristics of magnetic iron ore, iron ore using a magnetic device comprising the magnetic material separated from the other.
With the declining iron ore resources in China, the problem of insufficient capacity in China's iron ore production technology is highlighted, so it is said that China urgently needs to improve ore production technology. A new method of magnetic separation of iron ore is presented below.
The iron ore magnetic separation machine needs to use the iron ore magnetic separator. The working principle of the iron ore magnetic separator is: after the iron ore slurry flows into the tank through the feeding tank, under the action of the water flow to the mine sprinkler pipe, The ore particles are loosely fed into the feeding area of ​​the tank. In the action of the magnetic field, the magnetic ore particles are magnetically aggregated to form a "magnet" or "magnetic flux". The "magnet" or "magnetic flux" is magnetically applied to the magnetic pole, moves toward the magnetic pole, and is adsorbed on the cylinder. . Since the polarities of the magnetic poles are alternately arranged in the direction of rotation of the cylinder, and are fixed during operation, the "magnet" or "magnetic flux" is magnetically agitated due to the alternating magnetic poles when being rotated with the cylinder, and is mixed. The non-magnetic minerals such as gangue in the "magnet" or "magnetic flux" fall off during the flipping, and the "magnet" or "magnetic lotus" that is finally attracted to the surface of the cylinder is the iron ore concentrate. The concentrate is transferred to the iron ore concentrate tank under the action of the flushing water jet from the unloading water pipe. Non-magnetic or weakly magnetic minerals are left in the slurry with the slurry exiting the trough, which is the tailings.
Stainless Steel Cut Wire Shot As Conditioned
Cut Wire Shot is a very important and popular Metal Abrasive.It is often utilized in shot peening processes when ferrous contamination of work piece is forbidden. As the most cost-effective one, the stainlesss steel cut wire shot, also named Stainless Steel Shot, is widely used for shot peening processes on stainless steel or inconel parts. When Blasting stainless work pieces or other metals need to be down as a pristine surface, stainless cut wire may be a very good metal abrasive to take into consideration. Stainless Steel Cut Wire shot as conditioned is usually used for shot peening processes on stainless steel or inconel parts. As for Longlived stainless steel cut wire shot, the minimum diameter could be 0.15mm and maximum diameter is 3mm. If you want, it could be bigger as your demand.
Concerning stainless steel cut wire shot, it has a very bright surface, maintains its shape longer then cast abrasives and it has a dust free surface. Stainless Steel Cut Wire is available as cut or conditioned and with various chemical compositions.The bulk density of stainless steel cut wire shot is very high and must be taken into consideration in relation to its use in equipment. Suitable equipment must be selected to convey stainless steel shot.
Generally, stainless steel cut wire shot could be classfied into two kinds. One is Stainless Steel Cut Wire Shot AS Cut and as conditioned. And then, stainless steel cut wire shot as conditioned could also be divided into three small groups according to their different roundness and they are G1, g2, G3.
Cut Wire Shot As Conditioned,Stainless Ssteel Cut Wire Shot,Sus304Stainless Steel Cut Wire Shot Blasting,Sus304Stainless Steel Cut Wire Shot Sandblasting
Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com