Model NO.: QC12Y- 6x3200
Cutting Width: 3200mm
Power: 380V/50Hz/3phase
Power Sourcepower Source: Hydraulic Pressure
Name: Sheet Metal Shearing Machine
Trademark: Durmapress
Transport Package: Steel Wire and Plastic Film
Specification: 3840*1610*1620mm
Origin: China Mainland
HS Code: 8462399000
Production Details:
This shearing machine we also call swing beam shear machine. The machine is hydraulically powered or mechanically. It works by first clamping the material with a ram, A moving blade then comes down across a fixed blade to shear the material.
The workpiece material include aluminum, mild steel, stainless steel, galvanized sheet, iron sheet, and so on.
1.Adjusting of the gap between blades is portable and quick. The value of the gap is indicated on a dial.
2.Adopt advanced hydraulic system, reliable and easy for maintenance.
3.Meet with international safety standard.
4.Frame welded, vibration to eliminate stress, high in rigidity, sturdy and durable. Hydraulic drive, swing beam, return of knife beam is smooth and prompt by accumulator or nitrogen cylinder, stead&reliable performance.
5.The position of low blade can be adjusted to ensure the equilibrium of the gap after regrinding. The portable and prompt adjusted of the blade's gap, the value of gap is indicated by dial, positioning reliable.
6.The digital display devices used to the back gauge's value and the shearing times are on the front of the machine.
1. Standard Equipment:
Estun E21sNC control SystemPowered Back gaugeX-axisDELTA Inverter controlled back gaugeHIWIN Ball screws & Polished rod with 0,05mm accuracy.Squaring Arm and Front Support ArmsGermany Bosch-Rexroth HydraulicGermany EMB Tubing connectorGermany Siemens Main MotorTele mecanique/Schneider ElectricsHydraulic &Electrical overload protectionCutting Line Illumination and wire for shadow line cuttingTop blade with four cutting edges and bottom blade with four cutting edges.(6CrW2Si)
Â
2. Safety Equipment:
Safety Standards(2006/42/EC):
1.EN 12622:2009 +Â A1:2013
2.EN ISO 12100:2010
3.EN 60204-1:2006+A1:2009
Front finger Protection(Safety light curtain)South Korea Kacon Foot Switch(Level 4 of safety)Back metal safe fence with CE standardsSafety relay with Monitor the pedal switch and safety protection
Â
3. Estun E21s NC Control system:
Backgauge controlControl for general AC motors,frequency inverterIntelligent positioningDouble programmable digital outputStock counterProgram memory of up to 40 programs Up to 25 steps per programOne side positioningRetract functionOne key backup/restore of parametersmm/inchChinese/English
Shearing machine specifications
| Parameter | Shearing Thickness(mm) | Shearing Width(mm) | Shearing Angle | Number of stroke | Backgauge (mm) | Motor (kw) | Overall Dimensions(mm) |
| 4*2000 | 4 | 2000 | 1°30' | 18 | 20~600 | 4 | 2550*1430*1560 |
| 4*2500 | 4 | 2500 | 1°30' | 18 | 20~600 | 4 | 3100*1430*1560 |
| 4*3200 | 4 | 3200 | 1°30' | 18 | 20~600 | 5.5 | 3840*1680*1670 |
| 4*4000 | 4 | 4000 | 1°30' | 15 | 20~600 | 5.5 | 4600*1700*1670 |
| 4*6000 | 4 | 6000 | 1°30' | 10 | 20~800 | 7.5 | 6600*1900*1900 |
| 6*2000 | 6 | 2000 | 1°30' | 18 | 20~600 | 5.5 | 2540*1616*1620 |
| 6*2500 | 6 | 2500 | 1°30' | 18 | 20~600 | 7.5 | 3040*1616*1620 |
| 6*3200 | 6 | 3200 | 1°30' | 14 | 20~600 | 7.5 | 3840*1610*1620 |
| 6*4000 | 6 | 4000 | 1°30' | 10 | 20~600 | 7.5 | 4640*1705*1700 |
| 6*5000 | 6 | 5000 | 1°30' | 10 | 20~600 | 11 | 5600*1950*1980 |
| 6*6000 | 6 | 6000 | 1°30' | 10 | 20~600 | 11 | 6600*1950*1980 |
| 8*2000 | 8 | 2000 | 1°30' | 14 | 20~600 | 7.5 | 2740*1610*1620 |
| 8*2500 | 8 | 2500 | 1°30' | 14 | 20~600 | 11 | 3240*1610*1620 |
| 8*3200 | 8 | 3200 | 1°30' | 10 | 20~600 | 11 | 4010*1610*1620 |
| 8*4000 | 8 | 4000 | 1°30' | 8 | 20~600 | 11 | 4680*1705*1700 |
| 8*6000 | 8 | 6000 | 1°30' | 8 | 20~800 | 18.5 | 6880*2210*2890 |
| 8*8000 | 8 | 8000 | 1°30' | 6 | 20~800 | 22 | 8880*2250*2990 |
| 10*2500 | 10 | 2500 | 1°48' | 12 | 20~600 | 15 | 3350*2050*1950 |
| 10*3200 | 10 | 3200 | 1°48' | 10 | 20~600 | 15 | 4050*2050*1950 |
| 10*4000 | 10 | 4000 | 1°30' | 8 | 20~800 | 18.5 | 4850*2300*2200 |
| 10*6000 | 10 | 6000 | 1°30' | 8 | 20~1000 | 30 | 7020*2580*3280 |
| 12*2000 | 12 | 2000 | 1°30' | 10 | 20~600 | 15 | 2820*2050*2230 |
| 12*2500 | 12 | 2500 | 1°30' | 10 | 20~600 | 18.5 | 3320*2050*2230 |
| 12*3200 | 12 | 3200 | 1°30' | 10 | 20~800 | 18.5 | 4020*2050*2230 |
| 12*4000 | 12 | 4000 | 1°30' | 8 | 20~800 | 22 | 4850*2400*2300 |
| 12*5000 | 12 | 5000 | 1°30' | 7 | 20~800 | 22 | 6100*2400*2300 |
| 12*6000 | 12 | 6000 | 1°30' | 6 | 20~1000 | 37 | 7020*2680*2400 |
| 12*6200 | 12 | 6200 | 1°30' | 6 | 20~1000 | 37 | 7220*2680*2400 |
| 12*8000 | 12 | 8000 | 1°30' | 4 | 20~1000 | 45 | 9020*2680*2580 |
| 16*1600 | 16 | 1600 | 2° | 8 | 20-800 | 18.5 |  2400*2060*2010 |
| 16*2500 | 16 | 2500 | 2° | 8 | 20~800 | 18.5 | 3300*2060*2010 |
| 16*3200 | 16 | 3200 | 2° | 7 | 20~800 | 22 | 4100*2060*2200 |
| 16*5000 | 16 | 5000 | 2°30' | 6 | 20~800 | 37 | 6100*2400*2300 |
| 20*2500 | 20 | 2500 | 2° | 6 | 20~800 | 22 | 3440*2088*2470 |
| 20*3200 | 20 | 3200 | 2° | 5 | 20~800 | 30 | 4100*2350*2610 |
| 20*4000 | 20 | 4000 | 2°30' | 4 | 20~800 | 37 | 4920*2400*2690 |
| 25*2500 | 25 | 2500 | 3° | 5 | 40~1000 | 45 | 3480*2410*2590 |
| 25*3200 | 25 | 3200 | 3° | 5 | 40~1000 | 45 | 4180*2410*2590 |
| 25*4000 | 25 | 4000 | 3° | 5 | 40~1000 | 45 | 4985*2410*2590 |
FAQ
| No.1Â How about your machine quality?We are worry about the quality. |
| Durmapress is a mature brand in CHINA,through our 10 years research in technology,our design including structure and detailed sercurity and precision has enhanced greatly,and can match all the CE standard or more strict standard.Our machines distribute worldwide to about 50 countries where there are metal plate industry ,there are Brillante machines.And where there are our machines,there are good reputation and terminal user satisfaction. |
| No.2Â Whether the machine price can be more discount? |
| Durmapress always provide high quality machine,as we know ,oversea market is more important and difficult than domestic market because of communication time costing after sales,So always,our machine has enough qaulity standard to make sure the machine can work more than the real warranty period.In this way ,we will save a lot and think in advance for the clients.  Actually Durmapress also think about our price level,we are sure to provide quality=price and pice=quality ,the matched price and acceptable for the clients and durable for our machines.We welcome your negotiate with us and get a good satisfaction. |
| No.3Â How about your manufactory in CHINA |
| Durmapress located in Ma'anShan CITY,AnHui province who is the leading area in China and also in the worldwide as the center of the metal plate solution machines,We have worked about 10 years in this area and totally have about 100 staffs.Rich experience in this field with professional technical supporting and oriented service. |
| No.4Â Where is your factory located? How can IÂ visit there? |
| Durmapress factory is located in Anhui Province(next to NanJing),China.You can fly to NanJing LuKou airport directly.All our clients, from home or abroad, are warmly welcome to visit us! |
Â
Boat Mooring Chain,Marine Anchor Chain,Cargo Ship Anchor Chain,Anchor And Anchor Chain
Jiangsu Zhongcan Marine Equipment Co.,Ltd. , https://www.anchorchainzc.com