The tip height correction can be used to balance and reduce the temperature rise of the root and the top of the tooth. It can also be used to reduce the temperature rise by the tooth profile and tooth root trimming method. The meshing process of the gear drive is a complex system. The lubrication of the gears in the transmission is unsteady. The correct design of the gear is conducive to the formation of dynamic pressure oil film, while dynamic pressure lubrication is an important condition to reduce gear wear and increase the wear resistance of the gear.
Generally, the comprehensive radius of curvature is large, and the thickness of the oil film is large; the smaller the modulus, the larger the thickness of the oil film; the higher the viscosity of the oil, the thicker the oil film, the better the bearing capacity and the anti-wear performance. In the case of ensuring the normal transmission movement of the gear 1, optimize the geometric parameters of the gear, and correctly select the lubricant so that the gear is in good condition during the transmission movement, which ensures normal operation, improves safety margin, prolongs gear life and improves efficiency. It has practical significance.

Activated Carbon Nonwoven Fabric

Activated carbon fabric for carbin filters

Activated carbon non woven filter fabric is also called activated carbon cloth, activated carbon filter cotton. The activated carbon non woven filter fabric is a three-layer cloth. Its top and bottom layers are non-woven fabric cloth and the middle layer is the high quality activated carbon powders. The non-woven fabric cloth and activated carbon powders are fastened by high temperature thermal pressing.

Special size and thickness are available upon request!

Activated Carbon Nonwoven Fabric,Activated Carbon Fabric For Carbin Filters,Needle-Punched Nonwoven Fabric,Activated Carbon Composite Filter Media

Hebei Fangyu Trade Co., Ltd. , https://www.laderytrading.com