What do you need to pay attention to when choosing a LED indoor screen in a large hotel and conference room and supermarket?

At present, more and more LED displays have entered the interior, especially large-scale hotels and conference rooms and large supermarkets have been favored by advertisers. What are the requirements for large-scale hotels to use indoor full-color screens?

In the indoor environment, large full-color electronic displays with an area greater than 5m2 mainly include three options: ordinary rear projection, DLP (digital liquid crystal rear projection) and LED display.

The advantages of the rear-projection type display are small pixels and high definition. The disadvantages are low brightness, small viewing angle, and short lens lamp life (only a few thousand hours). The advantages of plasma splicing are also small pixels and high definition. The disadvantage is that there is a patchwork, and the smallest patch seam can reach 1mm at present. Rear projection and plasma displays are suitable for closer viewing. The advantage of LED display is high brightness, no seams, the disadvantage is that the pixel particles are coarser and have lower resolution. The current commercial full-color indoor LED display has the highest density of P4, which is 62500 pixels/meter2. The LED display is suitable for viewing indoor places that are far away.

Problems to be considered when choosing LED indoor display

When choosing LED indoor display, it mainly considers from the following aspects.

1 real pixels and virtual pixels. As with outdoor full-color screens, the number of pixels in an indoor full-color screen is also divided into real pixels and virtual pixels.

2 die. As with the outdoor full-color display, it is generally recommended that the full-color blue and green tubes in the room use the cores of Shilan Mingxin, and the red tubes use Guanglei or Guangji's die. High-grade products are recommended to use the cores of Japan Nichia and the United States CREE.

3 package form. Indoor full-color LED display LED surface form has a single lamp, sub-surface paste, three together a surface mount and three-in-one surface mount, etc., the appearance is not the same. The advantage of the surface mount package is its large viewing angle, good luminescence consistency, and easy automatic soldering process. It is a full-color LED screen product, but now its price is relatively high; the single lamp has a relatively small viewing angle, a slightly higher brightness, and a lower price. The Asian surface sticker is actually a kind of single lamp. Single lamps and sub-surface stickers are relatively inexpensive and are transitional products.

4 density. Because indoor full-color LED chips generate more heat and control circuit density is higher, the dot density of commercial full-color screens can not be done very high, mainly P1.667 and P1.875.

P1.923, P2, P2.5, P3, P4, P5, P6, P7.62, P8, P10, etc.

5 drive mode. Indoor full-color LED display driver is constant current drive, using dynamic scanning (mainly 1/4, 1/8, etc. scan mode). In the case of the same die, the 1/4-scan circuit has more light and higher brightness.

Large-scale hotels and conference rooms and supermarkets choose LED indoor screen notes