First, check the wall before paving to be clean and smooth, there is no loosening off the wall surface.
Second, the use of wallpaper or other special tools for wall cloth, which is best to use professional imported wallpaper knife.
Third, first roll the wall base film on the wall, and adjust the wall cloth glue proportionately. (Note: 2 kg of glue is added in total with 2.5 kg of water. For the first time, add no water and mix well. Add 0.5 kg of water for the second time and mix evenly. After that, mix and stir the rubber powder of Mei Meijia household. Add 0.5 kg of water for the third time. Stir evenly. Add the remaining water for the fourth time and stir well. A bucket of glue can be glued to 25-30 square meters.)
Fourth, after the base film dry from the wall of a corner of the wall began to roll brush wall cloth adhesive, generally press the roller brush a wall (roll up and down evenly) began to paste wall cloth.
5. Put the wall cloth upright along the wall surface. The top height is the same as the height of the wall surface. The lower end uses an item to place the entire roll of wall cloth on the base of the baseboard.
Sixth, the wall cloth rolled out with a scraper to scrape the wall cloth attached to the wall, the order is from the inside to the side, the wall cloth up and down in the order and then continue to paving in this order.
VII. If the inner corner is straight, this rolling construction can be continued without cutting. If the inside corner is not straight, it can be lapped at the inside corner.
VIII. If the two work together, they can move faster. They can measure the length of the inside corner to the inside corner of the shade, leaving a little space for the cloth to be cut. After the two are straightened, they are straightened from top to bottom, from the inside to the side.
Nine, use a clean wet towel to wipe off excess glue.
X. After the whole house was completely checked, it was found that bubbles and blisters could be solved with a steam iron.
Second, the use of wallpaper or other special tools for wall cloth, which is best to use professional imported wallpaper knife.
Third, first roll the wall base film on the wall, and adjust the wall cloth glue proportionately. (Note: 2 kg of glue is added in total with 2.5 kg of water. For the first time, add no water and mix well. Add 0.5 kg of water for the second time and mix evenly. After that, mix and stir the rubber powder of Mei Meijia household. Add 0.5 kg of water for the third time. Stir evenly. Add the remaining water for the fourth time and stir well. A bucket of glue can be glued to 25-30 square meters.)
Fourth, after the base film dry from the wall of a corner of the wall began to roll brush wall cloth adhesive, generally press the roller brush a wall (roll up and down evenly) began to paste wall cloth.
5. Put the wall cloth upright along the wall surface. The top height is the same as the height of the wall surface. The lower end uses an item to place the entire roll of wall cloth on the base of the baseboard.
Sixth, the wall cloth rolled out with a scraper to scrape the wall cloth attached to the wall, the order is from the inside to the side, the wall cloth up and down in the order and then continue to paving in this order.
VII. If the inner corner is straight, this rolling construction can be continued without cutting. If the inside corner is not straight, it can be lapped at the inside corner.
VIII. If the two work together, they can move faster. They can measure the length of the inside corner to the inside corner of the shade, leaving a little space for the cloth to be cut. After the two are straightened, they are straightened from top to bottom, from the inside to the side.
Nine, use a clean wet towel to wipe off excess glue.
X. After the whole house was completely checked, it was found that bubbles and blisters could be solved with a steam iron.
Combination Machine,Tin Can Seaming Machin,Tinplate Can Making Machine ,Canning Machine
Zhoushan Putuo BODA Machinery Co., Ltd. , https://www.boda-machinery.com