Specification:
It is suit for twisting 2 - 20 cores PVC insulation wire ,electrical wire , CAT5/CAT6 wire , house wire , telephone wire etc
Consisting Components This machine is composed of Pay-off, single twist machine, center tapping machine, length counter, electric control system.
Â
Model |
WM-φ630mm |
WM-φ800mm |
WM-φ1000mm |
Application |
PVC/PE covered core wire or copper Twisting and center belting or side belting |
||
Feed wire shaft size |
Φ400mm-φ500mm |
Φ400mm-φ500mm |
Φ400mm-φ500mm-φ630mm |
Winding shaft size |
Outer diameterφ630x Outer Width 475x inner Width 400x inner hole φ56mm |
Outer diameterφ800x Outer Width 600x inner Width 500x inner hole φ80mm |
Outer diameterφ1000x Outer Width 750x inner Width 630x inner hole φ80mm |
Application wire diameter |
Φ0.6mm-3.0mm(Soft structure) |
Φ1.0mm-5.0mm(Soft structure) |
Φ1.2mm-5.0mm(Soft structure) |
Outer diameter |
Φ15mm |
Φ20mm |
Φ25mm |
Lay length |
20-200mm Step-less adjustable |
30-300mm Step-less adjustable |
30-300mm Step-less adjustable |
Rotate speed |
700rpm |
500rpm |
500rpm |
Upper and lower wire bobbin |
Pneumatic lifting |
Hydraulic lifting |
|
Method of traverse |
Double screw rod reciprocating traverse |
||
Take-up tension |
Pneumatic |
||
Brake |
Pneumatic brake |
||
Twist direction |
Left and right can freely selected |
||
Wrapping device |
Enter lapping or side packing |
||
S,Z Left and right can freely selected | |||
Suitable for the cotton paper, Mylar, aluminum tape | |||
|
Disk Drive:Φ350mm Hole diameter:Φ50mm Width:8-30mm |
Disk Drive:Φ350mm Hole diameter:Φ50mm Width:8-30mm |
Disk Drive:Φ350mm Hole diameter:Φ50mm Width:8-30mm |
|
Consisting Components
1.Double head /magnetic powder tension Pay off stand
2.Dancer
3.50 mm Main extruder
4.Automated loader &Â dryer
5.Color dozer
6.Auto centering Crosshead
7.Single layer Moving trough
8.Main cooling trough
9.Water wiper
10.Diameter controller
11.Online Mark printer
12.Accumulator
13.Capstan
14.Spark tester
15.Meter counter
16.Dual bobbin type Take up
17.Master control possible Control box
Motor:Dongguan Motor , Teco, ABB, Siemens
Inverter :Japan Yaskawa, Siemens, Taiwan Teco
Temperature Control Meter:Japan RKC;
Auxiliary Relay:Japan Omron ;
Ammeter and Voltmeter:Taiwan Risesun ;
Indicator, Switch and Button:Taiwan TEND ;
Contactor:Taiwan Shihlin
Line Speed Meter:Taiwan FOTEK/Yangming
Bearing :NSK, SKF
Where are we:
Hongkong airport to Houjie by boat 1Â hour
Guangzhou airport to Houjie by car 2Â hours
Shenzhen airport to Houjie by car 1Â hour
Guangzhou South high speed train station to Houjie 20 minutes
Shenzhen North high speed train station to Houjie 20 minutes
Our main products:Why us?
1.We are the cable equipment manufacturer.
2.Professional engineer,long-term to research and development for to cable equipment .
3.High frequency capacity manufacturer machine is provide .Guarantee the machine all weather running .
4.Our machine use the international qualified brand,like Siemens ,Omron,NSK,LG etc.
5.Install and training service.Guarantee overseas install and cable manufacture training experience.
6.Technical support and spare parts service.
Afetr service
1).Delivery dates:45 days
2).Payment:TT or L/C
3).Packing:Wood packing and PE plastic packing ensure the goods safety on the transportation.
4).Install and training service:2 professional engineers who has over 5Â years overseas install and cable manufacture training experience.
5) after service phone number online
Specification:
It is suit for twisting 2 - 20 cores PVC insulation wire ,electrical wire , CAT5/CAT6 wire , house wire , telephone wire etc
Consisting Components This machine is composed of Pay-off, single twist machine, center tapping machine, length counter, electric control system.
Â
Model |
WM-φ630mm |
WM-φ800mm |
WM-φ1000mm |
Application |
PVC/PE covered core wire or copper Twisting and center belting or side belting |
||
Feed wire shaft size |
Φ400mm-φ500mm |
Φ400mm-φ500mm |
Φ400mm-φ500mm-φ630mm |
Winding shaft size |
Outer diameterφ630x Outer Width 475x inner Width 400x inner hole φ56mm |
Outer diameterφ800x Outer Width 600x inner Width 500x inner hole φ80mm |
Outer diameterφ1000x Outer Width 750x inner Width 630x inner hole φ80mm |
Application wire diameter |
Φ0.6mm-3.0mm(Soft structure) |
Φ1.0mm-5.0mm(Soft structure) |
Φ1.2mm-5.0mm(Soft structure) |
Outer diameter |
Φ15mm |
Φ20mm |
Φ25mm |
Lay length |
20-200mm Step-less adjustable |
30-300mm Step-less adjustable |
30-300mm Step-less adjustable |
Rotate speed |
700rpm |
500rpm |
500rpm |
Upper and lower wire bobbin |
Pneumatic lifting |
Hydraulic lifting |
|
Method of traverse |
Double screw rod reciprocating traverse |
||
Take-up tension |
Pneumatic |
||
Brake |
Pneumatic brake |
||
Twist direction |
Left and right can freely selected |
||
Wrapping device |
Enter lapping or side packing |
||
S,Z Left and right can freely selected | |||
Suitable for the cotton paper, Mylar, aluminum tape | |||
|
Disk Drive:Φ350mm Hole diameter:Φ50mm Width:8-30mm |
Disk Drive:Φ350mm Hole diameter:Φ50mm Width:8-30mm |
Disk Drive:Φ350mm Hole diameter:Φ50mm Width:8-30mm |
|
Consisting Components
1.Double head /magnetic powder tension Pay off stand
2.Dancer
3.50 mm Main extruder
4.Automated loader &Â dryer
5.Color dozer
6.Auto centering Crosshead
7.Single layer Moving trough
8.Main cooling trough
9.Water wiper
10.Diameter controller
11.Online Mark printer
12.Accumulator
13.Capstan
14.Spark tester
15.Meter counter
16.Dual bobbin type Take up
17.Master control possible Control box
Motor:Dongguan Motor , Teco, ABB, Siemens
Inverter :Japan Yaskawa, Siemens, Taiwan Teco
Temperature Control Meter:Japan RKC;
Auxiliary Relay:Japan Omron ;
Ammeter and Voltmeter:Taiwan Risesun ;
Indicator, Switch and Button:Taiwan TEND ;
Contactor:Taiwan Shihlin
Line Speed Meter:Taiwan FOTEK/Yangming
Bearing :NSK, SKF
Where are we:
Hongkong airport to Houjie by boat 1Â hour
Guangzhou airport to Houjie by car 2Â hours
Shenzhen airport to Houjie by car 1Â hour
Guangzhou South high speed train station to Houjie 20 minutes
Shenzhen North high speed train station to Houjie 20 minutes
Our main products:Why us?
1.We are the cable equipment manufacturer.
2.Professional engineer,long-term to research and development for to cable equipment .
3.High frequency capacity manufacturer machine is provide .Guarantee the machine all weather running .
4.Our machine use the international qualified brand,like Siemens ,Omron,NSK,LG etc.
5.Install and training service.Guarantee overseas install and cable manufacture training experience.
6.Technical support and spare parts service.
Afetr service
1).Delivery dates:45 days
2).Payment:TT or L/C
3).Packing:Wood packing and PE plastic packing ensure the goods safety on the transportation.
4).Install and training service:2 professional engineers who has over 5Â years overseas install and cable manufacture training experience.
5) after service phone number online
Insulating Glass Production Line
As the most important process of insulating glass production, we are especially professional in glass cleaning, transmitting pressing and gas filling(optional).The production line can do double glass,triple glass and stepped glass.
Jinan Lijiang Automation Equipment Co., Ltd. have independently produced the vertical automatic IG production line with filling gas on line, the vertical IG sealing robot, the Automatic Spacer Bending Machine, the Automatic Desiccant Filling Machine and the new fully automatic Butyl Extruder Machine, its technology and quality have reached the highest leading level in China.
Insulating Glass Production Line,Insulated Glass Production Line,Double Glazing Glass Production Line,Double Glass Processing Machine
JINAN KATION TRADING CO.,LTD , https://www.machinerychinese.com