The first is the high-pressure cleaning vehicle water system should pay attention to matters 1. Check all seals before operation, whether there is leakage at the junction, water seepage phenomenon, otherwise it should be timely replacement of the seal ring: 2. Start the inspection once a week to check once a month, filter Whether there is dirt and other dirt in the device; secondly, check the power take-off device, transmission shaft, gearbox, coupling section and other parts before operation 1. Check if there is looseness in each connection piece and solid piece; Whether there is oil leakage, oil leakage phenomenon; 3 whether the various parts of the operation is light and flexible, smooth and normal, with or without vibration and other abnormal sound.
Second, pay attention to the hydraulic system of the high-pressure cleaning vehicle: 1. Check all the seals before operation, whether there is oil leakage or oil leakage at the joint, otherwise, replace the seal ring; 2. Check the filter dirt in the fuel tank every six months. Clean up the dirt in the filter. The oil in the hydraulic tank is changed for the first time in a month, the second time in 3 months, and once in the future. When selecting hydraulic oil, select different types of hydraulic oil according to the season, use N32 in winter, and use N46 in summer.
Finally, during the operation of the high-pressure cleaning vehicle, attention should be paid to some details. When operating, operators must not leave the operation cabinet in order to deal with emergencies in case of accidents. When operating, first use a pipe feeder to send the sprinkler into the pipeline, and then open the three valves. Other personnel must not be near the sprinkler to avoid injury. Do not use high pressure for water delivery, car washing or wall cleaning. Clean water should be used. Wastewater not only shortens the service life of the car, but also has an impact on the use of the car.
Medical Consumables Plastic Mould
Hospital and medical consumables refers to waste bins, disposable medical syringe, medical disposable bucket and baskets, the molding material is medical grade PP, volume can be different from 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 50ml, 60ml to 100ml, and needle is 16G-27G, Needle material: stainless steel 304 and life is 5 years. Please review the following specifications in details:
Standard needle size:
Usage:
Tear the single bag of syringe, remove the syringe with needle, remove the syringe needle protection sleeve, pull the plunger back and forth slide, tighten the injection needle, and then into the liquid, needle up, slowly push the plunger to exclude air, subcutaneous or Intramuscular injection or blood.
Storage condition:
Disposable Medical Plastic 2 ml Syringe Luer Slip store in the relative humidity not to surpass 80%, non-corrosiveness gas, cool, ventilates good, in dryly the clean room. Product sterilized by Epoxy hexylene, asepsis,non-pyrogen without unusual toxicity and hemolysis response.
Machining equipment:
FAQ:
Q1: How do you control quality of Disposable syringe mould quality?
A: We use our CMM measuring equipment to inspect mould critical dimensions and mould tryout sample parts, all dimension reports will be shared with customer and discussed with customer the best solutions to solve "NG" dimensions.
Q2: What are the MOQ and leading time?
A: 200000pcs each type; leading time is within 35 days or based on your quantity;
Q3: What are the terms of payment?
A: 50% in advance by T/T; the balance 50% by T/T before shipping or again copy of B/L, L/C are acceptable.
Q4: How to keep us away from risk?
A: Our manufacturing is with rules of CE, ISO, welcome to visit our factory, and we can send you samples before placing an order.
Medical Consumables Plastic Mould,Metal Injection Molding,Medical Syringe Plastic Injection Mould,Disposable Syringe Plastic Injection Mould
Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com