How to use the sweeper

Road Sweeper Usage Method 1: Cleaning Work 1 Turn on the power of the control box and point the control valve to the secondary valve position

2 Start the auxiliary machine

3 Turn the slave clutch control button to the closed position and the fan starts to work

4 Point the vacuum box control to a lowered position

5 Point the left or right control to the down position

6 Turn the left or right rotary control to the forward position (count clockwise in the left and counterclockwise in the right)

7 Point the left spray, right spray, and rear spray water control knobs to the open position

8 Point the pump control knob to the open position

9 The vehicle travels at the appropriate speed and starts cleaning action 2: The end of sweeping 1 The vehicle stops driving

2 Point the Pump Control, Left Spray Control, Right Spray Control, Rear Spray Control to Off Position

3 Point the broom control to the middle

4 Point the swash plate control to the ascending position and then to the middle position

5 Point the vacuum box control knob up and then back to the middle position

6 Point the secondary engine clutch control knob to the sub-position and then to the middle position

7 Point the control valve control button to the middle position

8 Shutdown the secondary engine

9 Turn off the power to the control box. 3: Unload the trash 1 Turn on the power to the control box, and point the control valve's control button to the position of the main valve.

2 Start the vehicle's main engine

3 Depress the vehicle clutch

4 Open the vehicle's additional oil pump clutch switch (pull outward)

5 Loosen the vehicle clutch at an appropriate speed

6 Point the rear door control knob on the control box to the open position, and then to the middle position after 5 seconds

7 Point the car control button to the up position. At any time according to the inclination of the car box, you can point the control button to the middle position. At this time, the car tilts up and stops.

8 Garbage Cleaning

9 When the garbage is cleaned, point the control button of the car to the lowered position. After the car is fully returned, point the control button to the middle position.

10 Point the rear door control to the off position, and then to the middle position after 10 seconds

11 Clean up the end of rubbish

12 Depress the vehicle clutch

13 Close the additional pump clutch control knob (pull inwards)

14 Loosen the vehicle clutch at an appropriate speed

15 Point the control valve of the control box to the middle position

16 Switch off the control box

Handheld Fiber Laser Marking Machine

Product features:

1.Air cooling system, easy installation,USB connection.

2.interfaces: text, graphics, serial number, a d bar code, 2 d bar code, successive signet (optional equipment), etc

3.Format support :SAF,PLT,DXF,CMX,EMF,SVG,AI,JOB,MCL,BMP,TWAIN,PCX etc .
4.Suitable for: anodized sculpture, hand tools deep carved, aluminum a deep carved, stainless steel surface carved black, IC table sculpture, etc.!

5.Advantages: small volume, avoid consumables, flexible, use 5-100000 hours without power attenuation

Product features:

1.Air cooling system, easy installation,USB connection.

2.interfaces: text, graphics, serial number, a d bar code, 2 d bar code, successive signet (optional equipment), etc

5.Advantages: small volume, avoid consumables, flexible, use 5-100000 hours without power attenuation

fiber laser marking machine, laser marking machine, mini type fiber laser

Jinan Transon Cnc Equipment Co., Ltd. , https://www.csjiguang.com