Infrared moisture meter installation site and electrode maintenance

Infrared moisture meter installation site:

1, infrared moisture meter may not be installed in a room with corrosive gases, corrosion of the infrared moisture meter circuit part, shorten the life of the instrument.

2, where the room temperature is lower than 5 degrees or higher than 40 degrees.

3, infrared moisture meter can not be installed in places with high sunlight and humidity.

4, infrared moisture meter may not be installed in places where power is not stable, it is recommended to use electronic voltage regulator.

Infrared moisture meter electrode maintenance 1, the measuring electrode is polluted, you can use acetone or ethanol to wipe, if you still can not decontamination, alcohol lamp can be used to burn platinum ball end.

2. When the electrolytic electrode is contaminated, acetone or absolute ethanol can be injected into the cathode chamber and shaken repeatedly to remove the internal dirt.

12㎡ Ceramic Filter Plate

Rongxin Environmental Protection Equipment Co., Ltd. , https://www.jsrxceramics.com