Iron ore flotation method

Anion collector positive flotation
Red iron ore easy floating main quartz and silicate gangue iron ore mirror, can use this method. Adjust the pH with sodium carbonate (7-9). Disperse sludge and sediment harmful metal ions. Use carboxylic acid as collector; or use petroleum sulfonate-fuel oil as collector, adjust pH to 4 with sulfuric acid, and the flotation particle size can be coarser. The prescription is simple and low in cost.
2. Anion reverse flotation
(1) Reverse flotation quartz with CaCl 2 (~100g/t) as activator, pH 11～12 with NaOH, hematite with starch (300g/t), and fatty acid as collector (500g/t) .
(2) reverse flotation apatite, phosphorus extremely harmful to iron, apatite anti-floating collector as a carboxylic acid, starch, and Na 2 SiO 3 inhibition hematite, about PH10.
3. Cationic reverse flotation
The magnetic separation iron ore concentrate contains a small amount of silica . It can be floated with primary and amine amines (0.3-0.5kg/t), and iron and minerals with starch and dextrin (0.5-0.7kg/t). PH10～ 10.5 (also 8 to 9). The advantage is that the mother liquor needs to be delimed in advance. It can be coarsely ground and has a high recovery rate, because in this case, several kinds of iron minerals can be floated differently without affecting the recovery rate. In order to eliminate the co-flocculation of iron oxide and quartz, it is possible to add an alcohol or a dodecyl sulfate.
4. Load flotation
In some fine grain low grade ore or iron ore tailings flotation, coarse iron minerals are also used as carriers to increase the flotation rate and recovery rate of fine particles.
5. Select flocculation - (reverse) flotation iron
After the first use NaSiO 3 or NaOH (NaPO 3) 6 finely ground (e.g. -37μ) dispersion of mineral particles, then adding starch or iron minerals selected humic acid flocculation, removal of fine mud, using any of the above The reverse flotation method is reverse flotation, and the iron concentrate is obtained from the bottom of the tank. The biggest disadvantage of this method is that it needs to be finely ground, so that the cost and energy consumption are too high.

High Frequency Welding Machine

High frequency welding machine, it provides a completely different finish than heat welding since its process it`s very different as well. This machine works with and electronic circuit that transmits a high frequency oscillation on a electric field alternating at high speed, the oscillation makes thermoplastic molecules to heat evenly to a melting point making them fuse completely after applying pressure and then refrigerating the materials resulting in a finished product that will be 100% waterproof with an airtight seal, flexible and with an impeccable visual finish while giving a higher stability, resistance and durability to projects with high climate exposure. Another advantage of radiofrequency its adaptability being able to penetrate on thicker materials or with multiple layers and adapt to different molds to cut on custom margins when needed. Some industries that benefit from this process are: automotive, medical, entertainment, stationery, fashion and household.

High Frequency Welding Machine,Pvc Book Cover Making Machine,Hf Plastic Welding Machine,High Frequency Plastic Welding Machine

Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.wfengmachinery.com