The one-year plan begins in spring, and as the cold winter gradually dissipates, construction projects of various types of construction machinery are just around the corner. Various types of equipment are gearing up to prepare for it.
When a variety of mechanical equipment competed for the market, there was a device that quickly occupied all types of large and small construction projects with lightning speed. The scope is astonishing. It is the Sany Micro Digger SY16C/SY35U.
Plug pole: small excavator also bursts with power
He Zhenchao, the micro-digging owner of the Yunnan Red River, always thought that the SY16C he had purchased could only do minor projects. He believed that the compact body limited its power until he completed the project - it will weigh up to 9 meters and weigh up to 400 kilos. The pole is lifted up.
SY16C plug telephone pole
He said afterwards that the SY16C uses the Yanmar engine, the main pump and the main valve, the swing motor and the traveling motor that are exclusively for the 31st. This kind of power explosion project is just a routine operation.
Groundwater construction: wonderful projects
At first glance, this construction also thought that the protagonist of the picture was just a digging machine toy. After a closer look, it was known that it was Trinity's micro-digging of the SY16C.
Groundwater construction
Groundwater construction
Due to the narrow construction site and poor land construction conditions, these SY16Cs can be easily overcome. It is reported that the device has a compact body, weighs only 1.75t, and is stable in construction. It adopts a reinforced working device and frame, and is based on the ANSYS platform. The structure is optimized, and the bad working conditions are also flat.
Extreme Orchard: The narrowest construction challenge
Orchard construction has traditionally been the home base for micro-digging. As we all know, the orchard area is relatively narrow and the working conditions are more complicated, requiring a miniature excavator with high work efficiency and compactness and flexibility.
Trinity micro-digging has the advantages of low fuselage, compact structure, and excellent performance. It can flexibly go through various orchards, complete the orchard weeding and reclamation, land leveling, fertilization and other conditions, is a good alternative to artificial helper.
Extreme Orchard: The narrowest construction challenge
Extreme Orchard: The narrowest construction challenge
An orchard is more demanding on equipment than the average orchard. Not only is the walkway narrow, but there is also a variety of sundries on the top. However, the narrowest part of Sany’s micro-digging can pass through the 980mm construction area and can move the boom sideways. Can easily excavate the outer edge of the track, can work in the space limit position such as wall corners, construction is more flexible.
Land Leveling: Accuracy UP UP
Spring is the peak season for land remodeling and leveling. Rural areas are sparsely populated, and young and young are less. Therefore, in the present rural areas, people are more inclined to use mechanical equipment for land leveling. This requires the equipment to have a high degree of accuracy, to avoid repeated manual repair later.
Trinity micro-digging is controlled by hydraulic pilot because all actions are not only stable, but also faster. According to the operator of the micro-digging, in terms of leveling the same area of ​​land, Sany micro-digging takes only two or three hours, while the use of labor requires one or two days, and the digging machine work is more neat, the effect is more it is good.
Land leveling
In the most common land renovation and leveling work in the spring, Sany micro-digging is one of the popular models. Many of the bosses stated that this equipment is "extraordinary value for money" and can be used regardless of previous land leveling, road construction, or post-construction. It has advantages over other types of equipment.
Shed construction: smart and more peace of mind
The operation in the spring construction shed is also very common. Many of the bosses stated that when choosing equipment, they often worry about digging too much of the fuselage, unable to adapt to the low working conditions in the shed, and 31 micro-digging is very good.
Shed construction
Shed construction
The compact body fits perfectly in all kinds of narrow and low construction environments, and the power is very strong. The working conditions are also very many. The conditions involved in the countryside can be perfectly handled, and even the boss said that there is a 31 micro-digging. Other people in the village want to rent!
Spring is intoxicating, and even more intoxicating than in spring is the enthusiasm of building homes across the country. In the season of the beginning of all things, Trinity made a lot of contributions. The group’s cash discount policy for group purchases at this time added a bit of warmth to this spring.
Group buy 50 days in the purchase of 50 units, March 19 - March 26 period to buy specified three one micro-dig SY16C/SY35U, can enjoy straight down 20,000 factory direct selling price. After the sale of 31 equipment, all purchase customers can also share 500,000 yuan in cash rewards! At the same time purchase two or more designated micro-digging, the second Taiwan can enjoy thousands of promotion ambassador reward!
Share 500,000 yuan in cash rewards
People with lofty ideals who have already committed themselves or are about to join the construction machinery industry may wish to seize this opportunity to start a good chapter in the new year and win good year-round conditions. (This article is from Trinity)
Ammonia cracker of XRAQ(FC)series takes liquid ammonia as the source material ,and when heated, decomposes into the mixed gas of 75% H2 and25% N2 under the action of catalyst.
Some of the usages of Ammonia cracker of XRAQ series:
1) It is used as the protective gas in the furnace which produces and processes the black metal, on-ferrous metal, metal plate, strip, wire material tubing and standard parts of machinery.
2) It is used as the shielding gas of tinning bath in the float glass production.
3) It is applied to the sintering circuit of cemented carbide and powder metallurgy.
4) It is applied to the sintering of high-temperature refractory (such as silicon carbide, silicon nitride)
5) It is used as the reducing gas in chemical industry.
6) It is used for deoxidization by hydrogenation in the nitrogen purification.
The Advancement of XRAQ(FC) series:
1)Low cost:Device of XRAQ(FC)series is an easy way to get the mixed gas of N2 and H2.Compared with hydrogen generation device by water electrolysis, it possesses the advantage of low investment, simple structure and easy operation.
2)Reliable Performance: Temperature is controlled by automatic temperature controller; flow rate is regulated by valves; no need of specially trained operators; stable gas can be get consecutively.
3) High quality catalyst, stainless steel that is heat and corrosion resistant, nickel chrome electric heating element are selected to use, which prolongs the service life.
4) Strong technological team and high-quality after-sale service. When installed on spot, the only thing to do is to connect the gas source and power. Excellent electrical and mechanical assembly technology; Continuous technical services are provided; Responsible for on-site commissioning and training.
Ammonia Cracker for H2 Generation,Hydrogen Generator Ammonia Decomposition,Hydrogen From Ammonia Crackers
Suzhou Xinrui Purification Equipment Co.,Ltd , https://www.gas-equipment.net