Recently, the first car network editor learned from Shenyang Jindihui integrity dealership that at present, the store has a Mercedes-Benz C-class C260 2013 paragraph 1.8T tiptronic fashion type (National IV) for sale in September 2013 . The style is very beautiful. Interested users may wish to visit the store directly.
Appearance, Mercedes-Benz C-class C260 is following the C180 and C200 after the body more and more stylish atmosphere, the former face from the original mosaic logo into a single logo placed in the intake grille above, this looks more modern. The car's wheels have also been improved, and the body's sense of fashion has been even better.
On the interior, first from the interior space, this Mercedes-Benz C260, which is biased towards business, is very spacious. The large skylight enhances the visual effect and can make the bosses feel relaxed. Everything in the interior is very careful about workmanship and quality. As a boss, of course, the car has to be very good on the grade.
Details of the used Mercedes-Benz C260 can be found in the table below:
The internal structural design is vane, vane damper is more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.
When the axis of rotation is moving, the blades that are connected to the axis of rotation rotate at the same time. The silicone oil in the oil chamber is squeezed between the blade andthe body to the back of the blade. The resistance formed by the pressure of the silicone oil to the area of the blade is the damping torque of the rotating shaft and the blade. The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
NOTE:
1. Please contact the corresponding product engineer for specific torque products.
2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.
3.It is closing position to assemble the shaft into the housing.
4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)
5.Operating temperature:0~40℃
6.Storage temperature:-10~60℃
Soft closing time test: Measure the closing time from angle 70 to 0.
Rated Torque (T).
Test Temperature: 23±2℃.
Durability test:
Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.
Rated Torque (T).
Operation Angle: 0°~110°.
Test Temperature: 23±2℃.
Durability test cycle: 50,000 cycles. The result of product test )>2s.
Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper
Shenzhen ABD Equipment Co., Ltd. , https://www.abddamper.com