1, Ning Baba not hot air is flowing upwards, if the radiator is hanging too high, it is easy to concentrate the heat on the top of the room, the actual temperature that people feel is lower than the design temperature, not only causes energy waste, but also improves the user's Heating costs.
2, as far as possible in the window below the window is a "cold radiation" strong place, because the temperature of the window in the room is the lowest, most of the downdraft concentrated in this vicinity. If a properly sized radiator is installed under the window, cold radiation and cold air circulation can be prevented. When a person approaches a cold window, cold air intrusion is not clearly felt. Especially in the rooms with floor-to-ceiling windows and large bay windows, short heat sinks are installed under the windows to enhance thermal comfort.
3, as far as possible in the area where people often activities
3.1 The living room radiator is recommended to be installed near the sofa. Usually people stay on the sofa longer.
3.2 The restaurant is undoubtedly installed next to the dining table. If the guest room is connected, it is recommended that the radiator be placed diagonally to enhance convection.
3.3 The toilet is usually installed on the toilet top and side, but it is not recommended to install in the shower area, because the bathroom radiator steel is more likely to cause corrosion.
in conclusion:
The installation location of the radiator must be combined with the requirements of decoration and function, and it can not only avoid decoration and reduce the heating effect, thereby reducing the quality of life.
Different from butt weld fittings, some pipe fittings are produced by forging method, they are called forged pipe fittings, including forged O-lets, nipple, union, plug,coupling and so on. According to difference in connection type, there are socket weld pipe fittings and Threaded Pipe Fittings.They belong to high pressure forged pipes, pressure for SW fittings shall be 3000# ,6000# ,9000#. The pressure of forged NPT fittings shall be 2000#,3000#,6000#.
Forged Elbows, tees,crosses, couplings,half-couplings,plug,bushing are covered by standard ASME B16.11. Their size is not very big. The size for ASME B16.11 forged fittings is 1/8``-4``.
As for branch outlet fittings, the manufacture standard for weldolet, sockolet, threadolet is MSS SP-97.
Forged Pipe Fittings
Forged Carbon Steel Pipe Fittings,Forged Weldolets,Threaded Pipe Fittings,High Pressure Forged Fittings
CANGZHOU HENGJIA PIPELINE CO.,LTD , https://www.hj-pipeline.com