Shanghai University of Technology had peace research group to enhance the optical nonlinear resonance through the active gain of the optical fiber to achieve precise control of the refractive index to achieve full polarization Polarization Lasers locked. Relevant research results recently published in the "Journal of Optics."
With the ultrafast laser to all optical fiber, all Paul partial, small development, making airborne and spaceborne gradually possible. Therefore, the study of a higher locking accuracy, all-fiber frequency locking method is particularly important.
Researchers in the Ytterbium-doped fiber laser cavity by adding a 980 nm / 1064 nm wavelength division multiplexer and a section of the erbium-doped optical fiber used to control the length of the optical cavity to achieve a full polarization-maintaining fiber laser frequency locking. Under the premise of not affecting the mode-locked state, the number of inverted particles of the erbium ions in the optical fiber is changed by modulating the intensity of the pump light loaded on the erbium-doped optical fiber to control the nonlinear refractive index of the optical fiber, Control of the entire laser optical cavity length.
In the meantime, the effects of different erbium-doped fiber length and initial pump power on the repetition frequency control range and locking accuracy of the laser were also measured in experiments. The results show that when the erbium-doped fiber is 1.75 meters, the frequency adjustment range of 180 Hz can be realized. The frequency locking accuracy is only related to the initial power of pumping light, but not to the length of erbium-doped fiber. When the pump light is 18 milliwatts, the peak-to-peak variation range is ± 0.5 milli-Hz with a corresponding standard deviation of 0.16 milli-Hz.
"With the rapid development of the optical frequency comb, the frequency-locked fiber laser will play an increasingly important role in such fields as absolute distance measurement, astronomical observation and spaceborne optical clock." Zeng Heping said that in the future, Internal noise suppression, supercontinuum generation, carrier phase detection and locking and other issues.
T-ceiling Light Keel Roll Forming Machine is a new building material, it widely used for hotels, terminals, railway stations, playgrounds, supermarkets, factories, office buildings, interior decoration and other places set. It has light weight, high strength, adapt waterproof, shockproof, dust, noise, sound-absorbing, temperature and so on.
Specifications:
Raw material
PPGI, GI, Aluminum coils
Material thickness range
0.2-0.5mm
Forming speed
0-40m/min(include punching)
Rollers
12 rows
Material of forming rollers
45# steel with chromed
Shaft diameter and material
40mm, material is Cr12
Controlling system
PLC
Material of cutting blade
Cr12 mould steel with quenched treatment
Voltage
380V/3Phase/50Hz or at your requirement
Main motor power
7.5KW
Hydraulic atation power
5.5KW
Way of driven
Gear
Working process:
Decoiler - Feeding guide - Main roll forming machine - PLC control system - Servo tracking cutting - Feeding paut for punch - auto punch machine - punch PLC control system - Receiving table
Pictures of machine:
Training and Installation :
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantages:
1. Short delivery period.
2. Effective communication
3. Interface customized.
Ceiling Light Keel Forming Machine
Ceiling Light Keel Forming Machine,Ceiling Cold Roll Forming Machine,T Grid Ceiling Forming Machine,Single Layer Ceiling Light Forming Machine
YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn