 Top Quality Corrugated Metal Tile Roof Roll Forming Machine
| 1) | Manual Uncoiler | 1set |
| 2) | Infeed Guide | 1set |
| 3) | Roll Forming Station | 1set |
| 4) | Post-cut Equipment | 1set |
| 5) | Hydraulic Station | 1pc |
| 6) | PLC Control Console | 1pc |
| 7) | Product Support Table | 2pcs |
| 8) | Spare Parts | 1box |
Components for the Machine:
The roll forming machine includes manual uncoiler unit, infeed guide, fixed position driven forming stations, pressing die, cutting equipment, hydraulic station, PLC console and manual unload product run out table.Â
| Material specification | Aluminum, alu-zinc, galvanized and pre-painted galvanized steel. |
| Thickness | 0.3-0.7mm.(perfect is 0.4mm-0.6mm) |
| Main motor power | 5.5 kw. |
| Hydraulic station power | 5.5kw. |
| Feeding width | 1000mm. |
| Cover width | 900mm |
| Yield stress | 235Mpa (33KSI) ~ 345Mpa (50KSI). |
| Roll forming Speed | 15-18 m/min |
| Cutting Tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm |
| Manual Uncoiler | Max. Capacity: 5000kgs. |
| Coil inner diameter | 508mm. |
| Voltage | 380V,3 Phase,50HZ,Or As per customer's request. |
| Numbers of stands | 17 stations |
| Type of cutting | Roll-formed and length-set profile cutting. |
3. Material of Main Equipment:
| Roller Material | High grade S45C forged steel, coated with hard chrome. |
| Active Shaft Material | High grade S45C carbon wrought steel, diameter 76mm. |
| Electric Elements | PLC control console, touch screen and transducer, from Siemens, Germany. Other elements, from Schneider Electric, Germany. |
| Cutter Blades | Cr12MoV steel with quenched treatment, hardness HRC58~61, wear-resistance, good steel structure, long life. |
Process Sketch
Uncoiling →Infeed guiding →Roll forming →Pressing→Measure Length&Shearing →Sheet to Support Table
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;Â
3.Spare parts and some small parts packed in plastic tooling box;Â
4.All Components Fixed by steel wire with Container.
Company Profile
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.Â
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
Â
Excavator Cylinder Piston Rod Seals
Installation and application of piston rod seal for excavator hydraulic cylinder
The installation and application of hydraulic cylinder piston rod seals in excavators mainly include the following aspects:
1. Applying lubricating oil: Before installing the seal, the surface of the piston rod must be coated with lubricating oil to facilitate the installation and use of the seal.
2. Install the seal: Install the seal on the piston rod in sequence, taking care not to pinch or bend the seal.
3. Pressing the seal: After installing the seal, special tools need to be used to press the seal tightly to ensure its tightness and stability.
4. Check the sealing effect: After installing the sealing element, it is necessary to check the sealing effect. It can be detected by observing the working status of the hydraulic cylinder or using tools such as leak detectors.
5. Application scenario: The piston rod seal of excavator hydraulic cylinder is mainly used in the hydraulic system of construction machinery such as excavators, loaders, and bulldozers to prevent hydraulic oil leakage and ensure the normal operation of the machine.
In summary, the installation and application of hydraulic cylinder piston rod seals in excavators is a very important part of the hydraulic system, and must be strictly operated in accordance with regulations to ensure the normal operation and safety of the machine.
Excavator hydraulic cylinder piston rod seal, hydraulic cylinder piston seal, sealing kit
Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com