The daily life of a city cannot be separated from the input of pipelines. When it is used to a certain extent, it will be clogged or messy. Then a pipeline cleaning vehicle is needed to solve the problem. How can the driver's friends clean the vehicle in the pipeline to reduce tire wear?
Today, there are eight ways to reduce tire wear:
1. At the beginning, do not accelerate too much to accelerate. The start loose clutch and the push-pull damper should cooperate well, so that the car starts slowly and avoids the tire tread and the ground to accelerate the tread wear.
2. When driving uphill, use inertia. Properly shifting gears and shifting gears in a timely manner will cause rolling loss of the drive wheels if the vehicles stop and start again, which will accelerate tire wear.
3. When going downhill, the speed should be properly controlled according to the size, length and road conditions of the slope. At the same time, pay attention to maintaining a safe distance of more than 50m from the forward vehicle and avoid the emergency braking.
4. When turning, the operation should be based on the condition of the curved road, the radius of the turn, the density of the traffic, and the speed of the vehicle. Remember to decelerate properly, not high-speed cornering, so as to avoid the role of inertial force and centrifugal force, so that the goods tilt side, resulting in unilateral tire overloading, accelerated tire wear, and even cause a rollover accident.
5. When driving on bad roads, reduce the impact between the tires and the road surface, avoid mechanical and tire damage, slow down and avoid tire bumps and strong vibrations.
6. When driving on the maintenance construction site, such as repairing roads and blasting rocks and diverting roads, the road surface is covered with sharp stones, but when it must pass, apply a slow-moving method to select the road surface to avoid over-impacting of the tires and serious stabbing. Or scratch.
7. In the muddy access road and snow-covered frozen section, you should observe in advance and choose a place that is relatively solid and has a small amount of slip. In the event of a wheel slip, stop immediately and try retrograde.
8. When you are in need of parking during driving, you should develop the habit of safe gliding. Choose a smooth, clean, grease-free surface to keep the stones from getting in contact with tires and tires. If the vehicle is overloaded, the rear wheel should be lifted without deforming the frame to prevent the rear wheel from being deformed too much due to heavy pressure.
Remember the above eight small methods? Although the driver's friends may have encountered it while driving, only a lot of friends would follow their own customary habits. This would have a greater risk. Only in strict accordance with the safety regulations can you protect your own personal safety and reduce the early entry of the vehicle into the maintenance period.
Forklift Machine,High Efficiency Forklifts,Heavy Duty Forklifts,Fast Speed Forklifts
Jiangsu Minnuo Group Co.,Ltd , https://www.js-minnuomachinery.com