Introduction
 large capacity centriuge machine is a relatively new type of gravity concentration apparatus. The machines utilize the principles of a centrifuge to enhance the gravitational force experienced by feed particles to effect separation based on particle density. The key components of the unit are a cone shaped "concentrate" bowl, rotated at high speed by an electric motor and a pressurized water jacket encompassing the bowl. Feed material,typically from a ball mill discharge or cyclone underflow bleed, is fed as a slurry toward the center of the bowl from above.The feed slurry contacts the base plate of the vessel and due to its rotation, is thrust outward.The outer extremities of the concentrate bowl house a series of ribs and between each pair of ribs is a groove. During operation the lighter material flows upward over the grooves and heavy mineral particles (usually of economic value) become trapped within them. Pressurized water is injected through a series of tangential water inlets along the perimeter of each groove to maintain a fluidized bed of particles in which heavy mineral particles can be efficiently concentrated.
large capacity centriuge machine  was patented in China. It is an efficient equipment for recovering free gold in all particle size ranges,specially for recovery of fine gold which is lost during the operation of the gravitational concentrators(sluice boxes and jigs). It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation, and recover gold from the old tailings.
Application shows that the recovery can be as high as 99%, and the concentrating ratio is up to 1,000 times. In recovering the natural gold in lode ore with size -0.074mm, the gold is up to 98%, For 0.004mm in particle size, the gold recovery is 97%.
Features
--99% High Recovery Rate
--Low Investment & High Income
--Low Maintenance , Labor Saving & Easy Operation
--Discharge directly & automatically
--Turbination Type Recoil Water Punching Holes, improve the water pressure and flush widely
--Frequency Changer adjust the rotation speed
--Water Filter avoid artificial remove
--Pressure Valve control the pressure
--Balance Test Before Shipment
--Internal Lining Board, increase the wear resistance
--Eleven-layer Inside Wall, improve the classification efficiency.
Technical Data
Â
| Model | STLÂ 19 | STLÂ 30 |
| Capacity(T/h) | 0.2-1 | 2-8 |
| Feed particles(mm) | 0-3 | 0-4 |
| Feeding concentration(%) | 0-50% | 0-50% |
| Recoil of water(T/h) | 1.5-2 | 4-5 |
| Concentrate production     (kg per time) | 2-3 | 10-20 |
| Driving Power(kw) | 0.75 | 1.5 |
| Cone rotational speed(r/min) | 800 | 600 |
| Water Pressure(Mpa) | 0.04 | 0.12 |
| Appearance size(mm) | 790×785×790 | 1180×1140×1250 |
| Weigh(kg) | 145 | 400 |
| STLÂ 60 | STLÂ 80 | STLÂ 100 |
| 10-40 | 35-70 | 75-120 |
| 0-6 | 0-6 | 0-6 |
| 0-50% | 0-50% | 0-50% |
| 10-15 | 17-25 | 40-60 |
| 30-40 | 60-70 | 70-80 |
| 4 | 11 | 18.5 |
| 460 | 400 | 600 |
| 0.25 | 0.35 | 0.4 |
| 1970×1670×1750 | 2300×1800×2200 | 2500×2000×2400 |
| 1300 | 1500 | 2000 |
Packaging & Delivery
Packaging Details:
Exported standard packing
Shipped in 30 days after payment
Company Introduction
There is no better , only better.
Weifang baite Magnet Technology Co., Ltd . is a modern joint-stock enterprise, which is producing magnetic and power equipment .It is the larger magnetic equipment manufacturer of reach and development , engineering design ,production and installation ,commissioning and service. The service is related to more than 10 areas ,such as electricity , coal ,building materials, metallurgy ,ports ,mining ,nonferrous metals ,power environmental production .At present ,we  have provided more than 3000 domestic customers with reliable and value-added and convenient professional equipment and programs, and at the same time ,we occupy more than 60%magnetic separation equipment matching share of China ball mill, crusher, iron sand ship and other production industry, Baite has firmly implemented IS09001.To seek value for customers, to seek development for enterprise. During pursuing development , our company never forget to seek value for our customers . we will design and manufacture equipments according to different requirments of our customers.Â
Â
Â
Â
Â
Â
Â
Introduction
 large capacity centriuge machine is a relatively new type of gravity concentration apparatus. The machines utilize the principles of a centrifuge to enhance the gravitational force experienced by feed particles to effect separation based on particle density. The key components of the unit are a cone shaped "concentrate" bowl, rotated at high speed by an electric motor and a pressurized water jacket encompassing the bowl. Feed material,typically from a ball mill discharge or cyclone underflow bleed, is fed as a slurry toward the center of the bowl from above.The feed slurry contacts the base plate of the vessel and due to its rotation, is thrust outward.The outer extremities of the concentrate bowl house a series of ribs and between each pair of ribs is a groove. During operation the lighter material flows upward over the grooves and heavy mineral particles (usually of economic value) become trapped within them. Pressurized water is injected through a series of tangential water inlets along the perimeter of each groove to maintain a fluidized bed of particles in which heavy mineral particles can be efficiently concentrated.
large capacity centriuge machine  was patented in China. It is an efficient equipment for recovering free gold in all particle size ranges,specially for recovery of fine gold which is lost during the operation of the gravitational concentrators(sluice boxes and jigs). It can be used not only for placer gold mining, but also for hard rock mining to recover the natural gold, replacing amalgamation, and recover gold from the old tailings.
Application shows that the recovery can be as high as 99%, and the concentrating ratio is up to 1,000 times. In recovering the natural gold in lode ore with size -0.074mm, the gold is up to 98%, For 0.004mm in particle size, the gold recovery is 97%.
Features
--99% High Recovery Rate
--Low Investment & High Income
--Low Maintenance , Labor Saving & Easy Operation
--Discharge directly & automatically
--Turbination Type Recoil Water Punching Holes, improve the water pressure and flush widely
--Frequency Changer adjust the rotation speed
--Water Filter avoid artificial remove
--Pressure Valve control the pressure
--Balance Test Before Shipment
--Internal Lining Board, increase the wear resistance
--Eleven-layer Inside Wall, improve the classification efficiency.
Technical Data
Â
| Model | STLÂ 19 | STLÂ 30 |
| Capacity(T/h) | 0.2-1 | 2-8 |
| Feed particles(mm) | 0-3 | 0-4 |
| Feeding concentration(%) | 0-50% | 0-50% |
| Recoil of water(T/h) | 1.5-2 | 4-5 |
| Concentrate production     (kg per time) | 2-3 | 10-20 |
| Driving Power(kw) | 0.75 | 1.5 |
| Cone rotational speed(r/min) | 800 | 600 |
| Water Pressure(Mpa) | 0.04 | 0.12 |
| Appearance size(mm) | 790×785×790 | 1180×1140×1250 |
| Weigh(kg) | 145 | 400 |
| STLÂ 60 | STLÂ 80 | STLÂ 100 |
| 10-40 | 35-70 | 75-120 |
| 0-6 | 0-6 | 0-6 |
| 0-50% | 0-50% | 0-50% |
| 10-15 | 17-25 | 40-60 |
| 30-40 | 60-70 | 70-80 |
| 4 | 11 | 18.5 |
| 460 | 400 | 600 |
| 0.25 | 0.35 | 0.4 |
| 1970×1670×1750 | 2300×1800×2200 | 2500×2000×2400 |
| 1300 | 1500 | 2000 |
Packaging & Delivery
Packaging Details:
Exported standard packing
Shipped in 30 days after payment
Company Introduction
There is no better , only better.
Weifang baite Magnet Technology Co., Ltd . is a modern joint-stock enterprise, which is producing magnetic and power equipment .It is the larger magnetic equipment manufacturer of reach and development , engineering design ,production and installation ,commissioning and service. The service is related to more than 10 areas ,such as electricity , coal ,building materials, metallurgy ,ports ,mining ,nonferrous metals ,power environmental production .At present ,we  have provided more than 3000 domestic customers with reliable and value-added and convenient professional equipment and programs, and at the same time ,we occupy more than 60%magnetic separation equipment matching share of China ball mill, crusher, iron sand ship and other production industry, Baite has firmly implemented IS09001.To seek value for customers, to seek development for enterprise. During pursuing development , our company never forget to seek value for our customers . we will design and manufacture equipments according to different requirments of our customers.Â
Â
Â
Â
Â
Â
Â
Heat Exchanger,High Efficiency Heat Exchanger,Plate Heat Exchanger,Industrial Heat Exchanger
Shenzhen Toyocool Refrigeration Equipment Co.,Ltd. , https://www.toyochiller.com