The automatic weighing machine is a relatively good product for our company's recent sales. This automatic weighing machine has high precision, simple and convenient to use, fast sorting, so it is deeply loved by users. Today Xiao Bian came to talk about the installation and adjustment of the automatic weighing machine conveyor belt. I hope you can learn more about the automatic weighing machine through this article.
Automatic weighing machine conveyor installation:
1) Rotate the adjusting nut to minimize the distance between the slave axis and the master axis;
2) Check the running direction of the belt and put the belt into the tray in the direction of the thick arrow (Fig. 1).
3) Adjust the adjusting nuts on both sides of the tray so that the tension of the belt is moderate. Place the belt in the center of the tray.
Automatic weighing machine conveyor belt adjustment:
1) Adjust the tension of the belt to a moderate degree, place it on the machine and observe the running condition of the leather.
2) If the belt is in the middle of the tray, it is normal and no adjustment is required;
3) If the belt is deflected to the left, adjust as follows:
The belt on the left side can be “tightened†and requires gradual adjustment. Observe while adjusting until the belt returns to the center position. If you find that the adjusting nut is tight, do not force adjustment.
The belt on the right can be “tuned†and requires progressive adjustment. Observe while adjusting until the belt returns to the center position.
If it is relatively large, adjust slowly and hard to come back, you can quickly loosen the right belt.
If the belt has been rubbed against the side panel, it should be stopped immediately.
This article gives you an introduction to the installation and adjustment of conveyor belts for automatic weighing machines. If you want to learn more about automatic weighing machines, you can contact us directly. Thank you for your great support!
Automatic weighing machine conveyor installation:
1) Rotate the adjusting nut to minimize the distance between the slave axis and the master axis;
2) Check the running direction of the belt and put the belt into the tray in the direction of the thick arrow (Fig. 1).
3) Adjust the adjusting nuts on both sides of the tray so that the tension of the belt is moderate. Place the belt in the center of the tray.
Automatic weighing machine conveyor belt adjustment:
1) Adjust the tension of the belt to a moderate degree, place it on the machine and observe the running condition of the leather.
2) If the belt is in the middle of the tray, it is normal and no adjustment is required;
3) If the belt is deflected to the left, adjust as follows:
The belt on the left side can be “tightened†and requires gradual adjustment. Observe while adjusting until the belt returns to the center position. If you find that the adjusting nut is tight, do not force adjustment.
The belt on the right can be “tuned†and requires progressive adjustment. Observe while adjusting until the belt returns to the center position.
If it is relatively large, adjust slowly and hard to come back, you can quickly loosen the right belt.
If the belt has been rubbed against the side panel, it should be stopped immediately.
This article gives you an introduction to the installation and adjustment of conveyor belts for automatic weighing machines. If you want to learn more about automatic weighing machines, you can contact us directly. Thank you for your great support!
Machine Bellow Cover,Armoured Bellow Cover,Armoured Protective Cover,Flexible Armour Bellow Cover
Jiangsu Krius Machine Partsanp Accessories Co.,Ltd. , https://www.kriusbellow-echain.com