Working Temperature: Normal Temperature (-40°C<T<120°C)
Material of Seal Surface: Soft Sealed
Valve Body: Casting
Application: Industrial Usage, Water Industrial Usage, Household Usage
Port Size: 2′-20′
Trademark: Afcon
Transport Package: Wooden Case or as Per Client’ S Requirment
Origin: Shandong, China
Double Axis Butterfly Valve Wafer Type
1. Size: DN50-500.
2. Body: Cast iron/Ductile iron/Stainless steel
3. Dise: Ductile iron/Stainless steel.
4. Tength more highly, seal more reliably for seat.
5. Easy and fast installation, making cost minimized
Brief introduction of double axis butterfly valve wafer type
1. Double axis butterfly valve designed to comply with MSS-SP-67, BS 5155 and API609. Compatible with GB, DIN, BS, ANSI125/150 flanges. Face to face according to ISO5752.
2. The seat of double axis butterfly valve is designed in to without back, the touque-and-groove seat is lower torque and replaceable.
3. There is O-ring casted on the seal surface of the seat, negates need for flange gaskets.
4. Available in wafer type and lug type.
5. Available with handles, manual gear operators and electric or pneumatic actuators.
More information about wafer type spline butterfly valve.
Our butterfly valve conform to the international standard like GB, ANSI/API, DIN, BS as well as client's special specifications. The butterfly valves have met with warm reception based on excellent quality, good shipment and timely delivery time all over the world. Butterfly valves are widely sold in America, Germany, UK, Italy, Spin, Holland, Sweden, United Arab Emirates, Singapore etc.
Detailed Description of butterfly valve | |
Series: | double axis butterfly valve wafer type |
Design Standard: | API609/ISO5752 |
Size: | DN50-DN500/2" -20" |
Flange: | PN6, PN10, PN16, PN25, ANSI150, ANSI125, JIS 10K, TABLE" D" , TABLE" E" |
Face to face: | ISO 5752 |
Body: | Cast Iron/Ductile Iron/Stainless Steel |
Disc: | Ductile Iron/Ni-plated ductile iron/Stainless steel/Al-Bronze |
Stem: | Zine Plated Steel/ Stainless Steel |
Seat: | EPDM/NBR/PTTE |
Application: | petroleum, chemical industry, water and electricity, foodstuff, medicament, light textile, paper making, metallurgy etc. |
Certification: | ISO9001: 2008, CE, SGS |
Tower Crane gear mainly including 19/38/99 teeth gear, bevel gear, Tower Crane Sun Gear, and so on, which are the critical parts of the tower crane reducer. 19 teeth gear and 38 teeth gear are connected with two motor shaft repectively, which are connected with 99 teeth gear. The speed is reduced by the transmission of gears.
Bevel Gear,Tower Crane Sun Gear,Crane Pinion Gear,Tower Crane Transmission Gear,Tower Crane Drive Shaft
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytopkittowercrane.com