Because of the small size of the Activated Carbon, it is easy to float, and it requires high-temperature drying and other technical difficulties. It has not been suitable for drying equipment. Our technical department has developed an activated carbon belt dryer to solve this technology gap. With the difficulties of mesh belt leakage and material flying, the belt dryer designed by our company adopts a 13-stage design of the air circulation under the drying section, and the rotating shop floor automatically fills the material to increase the cooling section. The output can reach 2 tons/hour. Main technical parameters of the equipment:
1.1 Equipment Name: Mesh Belt Continuous Dryer
1.2 Equipment Model: DW-2×30
1.3 Band width: 2m, drying section length: 26m, cooling section length: 4m
1.4 drying temperature: 170 ~ 200 °C
1.5 material thickness: 40 ~ 60mm
1.6 Material drying residence time: 1 to 3 hours (adjustable according to material requirements)
1.7 System Air Volume Description:
1.7.1 Total air volume of the system: 6000×13=78,000m3/h
1.7.2 Supplementary Air Volume (Exhaust Air Volume): 22,000Kg/h
1.8 Heating Method: Direct-fired natural gas heating
1.8.1 Heat supply of hot blast stove: 120×104KCal/h, supply air temperature: 200～300°C
1.8.2 Natural gas consumption: 100～130m3/h, supply pressure: 8～15KPa
1.9 installed power: 105Kw
1.10 Host footprint size (length × width × height): 37 × 5.5 × 4 m
Propylene glycol is an important raw material for unsaturated polyester, epoxy Resin, and polyurethane resin. The amount in this area accounts for about 45% of the total consumption of propylene glycol. This unsaturated polyester is used in large quantities for surface coatings and reinforced plastics.
Propylene Glycol,Mono Propylene Glycol,PG 99.5%
HENAN JINHE INDUSTRY CO.,LTD , https://www.speciatyelement.com