Please fiind the specifcation for the FORD REPLICA WHEEL as below:
Â
| SIZE | PCD | C/B | ET | Â | Â | Â | Â |
| 20X8.5 | 6-135 | 87.1 | 44 | Â | Â | Â | Â |
| 18x8.5 | 6-135 | 87.1 | 44 | Â | Â | Â | Â |
| Â | Â | Â | Â | Â | Â | Â | Â |
| Â | Â | Â | Â | Â | Â | Â | Â |
Also we could make the Design as customers' need!
For more details, please feel free to contact with us and we will do our best to meet your wheel requirement.
A cyclone sepatation is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation. Totational effects and gravity are used to separate mixtures of solid and fluids. A high speed rotating air flow is established within a cylindrical or conical container called a cyclone. Air flows in a helical pattern, beginning at the top of the cyclone and ending at the bottom end before exiting the cyclone in a straight stream through the centre of the cyclone and out the top. Larger particles in the rotating stream have too much inertia to follow the tight curve of the stream, and thus strike the outside wall, then fall to the bottom of the cyclone where they can be removed. In a conical system, as the rotating flow moves towards the narrow end of the cycone, the rotation radius of the stream is reduced, thus separating smaller and smaller particles. The cyclone geometry, together with volumetric flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency. Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency as they separate with more difficulty or can be subject to re-entrainment when the air vortex reverses direction to move in direction of the outlet
Cyclone Dust Separator,Cyclone Dust Extractor,Dust Collector Cyclone Separator,Industrial Cyclone Dust Collector
Botou Ever Lucky Environmental Protection Machinery Co., LTD , https://www.dustcontrolling.com