The adaptability of the three application modes of the wireless bridge

Lifting a wireless bridge will flash the concept of paired use in the brain. It is the use of point-to-point. In fact, during the use of the wireless bridge, in addition to point-to-point transmission, it can also be used in point-to-multipoint and relay mode. The following Lean technology introduced the difference between them.
1, point to point transmission

In fact, the two networks A and B are connected through two wireless bridges with the same frequency.
The application in the wireless monitoring industry is: if there are many cameras at the front end that can be transmitted together, the centralized cameras can be centralized by one switch, and then transmitted through one wireless bridge, and the receiving end can use one more. The same frequency bridge receives this signal. If there is only one network camera, directly connect the camera signal to the device with a network cable.
In this transmission mode, the loss is small and the transmission distance is long, which is suitable for no obstacles or long-distance transmission.
2, point-to-multipoint transmission
It is to establish the local area network by setting the wireless bridges to the same frequency as the network of points A and B and point C.
The application in the wireless monitoring industry is that the front end can transmit multiple bridges, and the receiving end receives a bridge.
This method is suitable for monitoring points or cameras more and more dispersed, although point-to-multipoint transmission, but the maximum limit, it is best not to exceed 1 to 4.
3, relay transmission

The relay mode is between A, B, and C. The signal of A is to be transmitted to C. The two points are blocked by C. However, if A and C are not blocked by B, you need to The signal at point A is transmitted to the relay point at point B, and then the signal is transmitted to point C through point B so that the signal at point A is transmitted to point C through relaying.
In wireless monitoring, if you want to transmit over the air in the case of an obstruction, you can only use relay mode.
This transmission mode does not have any effect on the effect of the transmission, but each relay will increase the delay slightly, so it is recommended not to relay too much in a wireless monitoring system.
The above three methods are more common wireless monitoring methods. Which one is adopted depends on the specific environment. If you are not very clear about the operation, you can tell the staff of Leian about the situation on the spot. We will give you the most suitable way.

We are the inventor of automatic down weighing and filling machine. All filling machines are applied in down garments enterprise filling process, and are applicable to 90, 80, 70, 60 and 50 down. High pressure air is used to absorb down through the automatic weighing system, and to fill the panel with a preset weight of down. With dual or triple or fourth weighting system, the speed of down-filling machine is 2-4 times faster than that of manual method, down-filling is no longer needed skilled workers. Non-contact weighing method is used and the highest precision of single down filling can reach 0.01g even 0.001g; According to given target gram weight, the actual down gram weight will be automatically increased or reduced as necessary during filling. At same time ,the application of central dust-removal system greatly improves the overall working and production environment of the down-filling workshop, it can lower down loss as well as reduce the cost of down and reuse the down.

*Related Products:Down Garment Filling Machine,Down Stuffing Machine,down apparel filling machine,duck Down Filling Machine,flow down filling machine,down feather filling machine,down coat filling machine.


Down Filling Machine

Down Filling Machine, Down Jacket Filling Machine, High Output Down Filling Machine, Automatic Down Filling Machine, Down Garment Filling Machine, Down Stuffing Machine

Changshu Bealead Automatic Machine CO., LTD. , https://www.bealeadglobal.com