Conical Screw Mixer is worldwide acknowledged as the industrial standard conical shape mixer and Conical Screw Mixer is used on a wide variety of applications in the industry such as pharmaceutical, food, battery materials, dyestuff & pigment, chemical industry, fertilizer, rare earth, titanium powder etc. Conical Screw Mixer is widely used to mix powder-powder, power-liquid, especially for fine powder, fiber or chip-shaped materials
Â
Working Principle:
Conical screw mixer is made based on the principle of rotation and revolution, conveying the material along with the axle by means of rotation. Simultaneously, the material is upward and downward cycled by gyratory stirring along wall surface of cone, with the central revolution, conical screw mixer can be performed in the shortest time.
Â
Features:
1, homogeneous mixing & no deadcorner
2, short mixing time 5-15minutes
3, clean discharge & no leftover
4, central discharge valve:
Electronic, pneumatic, manual (optional)
Ball valve, flap valve, knife gate valve, butterfly valve (optional)
5, main shaft seal: Stuffing seal and air purge seal
6, drive: Siemens motor, cycloid or gear reducer
7, limit/safety switch (optional)
8, heating/cooling jacket optional)
Datasheet:
Â
Â
Â
| Â Â Model Project | All volume (M3) |
Loads coefficient | Electrical machiney power (KW) |
Size (mm)× Max-diameter ×High | Equipment weight (kg) |
| DSH-0.06 | 0.06 | 0.4-0.6 | 1.5 | φ630×1451 | 150 |
| DSH-0.1 | 0.1 | 0.4-0.6 | 1.5 | φ715×1569 | 250 |
| DSH-0.3 | 0.3 | 0.4-0.6 | 2.2 | φ920×1960 | 550 |
| DSH-0.5 | 0.5 | 0.4-0.6 | 3 | φ1140×2320 | 600 |
| DSH-1 | 1 | 0.4-0.6 | 4 | φ1480×2895 | 1200 |
| DSH-1.5 | 1.5 | 0.4-0.6 | 5.5 | φ1633×3210 | 1350 |
| DSH-2 | 2 | 0.4-0.6 | 5.5 | φ1816×3495 | 1500 |
| DSH-3 | 3 | 0.4-0.6 | 7.5 | φ2040×3760 | 2300 |
| DSH-4 | 4 | 0.4-0.6 | 11 | φ2250×4425 | 2520 |
| DSH-6 | 6 | 0.4-0.6 | 15 | φ2548×4940 | 3000 |
| DSH-8 | 8 | 0.4-0.6 | 18.5 | φ2780×5360 | 4500 |
| DSH-10 | 10 | 0.4-0.6 | 22 | φ3018×5815 | 5500 |
| DSH-12 | 12 | 0.4-0.6 | 22 | φ3204×6100 | 5900 |
| DSH-15 | 15 | 0.4-0.6 | 30 | φ3442×6540 | 6600 |
| DSH-20 | 20 | 0.4-0.6 | 37 | φ3805×7420 | 9800 |
| DSH-25 | 25 | 0.4-0.6 | 37 | φ4086×7800 | 10200 |
| DSH-30 | 30 | 0.4-0.6 | 45 | φ4330×8200 | 11500 |
 2.    Changes are available according to customer's special requirement;
 3.   Shuang Long Group might develop new data which is not modified timely on the Web.
Applications:
Quenched And Tempered Steel Bar
Quenched and tempered steel bar is produced by quenching and tempering which is one kind of heat treatment to get high mechanical properties and hardness. Our advantages and more services of quenched and tempered steel bar includes:
1) Wide range of diameters from 10mm to 100mm
2) Customized Length from 100mm to 12000mm
3) Good surface roughness: 0.4um to 1.5um
4) Good straightness: 0.5mm/m to 2mm/m
5) Good roundness: 80% of diameter tolerance
6) Diameter tolerance: -0.02mm to -0.06mm/h9, h10, h11
7) Matched further processing: Grinding, polishing, straightening
8) Anti-rusty package
9) Full sets of testing equipment: Surface, Dimenstion. Mechanical properties testing
10) Fast delivery time
quenched and tempered steel, quenched and tempered steel bar,42CrMo4 qt steel bar,qt steel bar,4140 Q&T steel bar
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdcolddrawnsteelbar.com