Non-metallic Ore Powder Classifier
1.Under the action of strong centrifugal force generated by the high-speed rotating grading turbine, the coarse and fine materials are separated, and the fine particles that meet the particle size requirements are collected by the cyclone separator or dust collector through the clearance of the grading wheel blade. The fine particles that meet the requirements of particle size enter the cyclone separator or dust collector through the clearance of the grading wheel blade. The coarse particles enter the secondary grading area through the fan and are graded for the third time under the action of the secondary wind. The material that meets the particle size enters the first-level grading area through the fan and is graded again.
2. The material that meets the particle size requirements enters the cyclone collector or dust collector through the grading wheel blade, and the separated coarse particles are discharged through the unloading device.
3.The QLFD classifier and the feeder, cyclone separator, dust collector, induced draft fan control system constitute a set of grading system. Under the action of negative pressure wind, the material directly enters the grading area from above the equipment through the feeder.
Non-Metallic Ore Powder Classifier,Non-Metallic Powder Classifier,Non-Metallic Mine Powder Classifier,Non-Metallic Aidaniter Powder Classifier
Shandong Jing Xin Powder Equipment Technology Co., Ltd. , https://www.jxpowder.com