In the long run, the use of LEDs in the general lighting market will continue to rise, so LED demand will remain strong for a long time. It is expected that the demand for high-brightness LED will increase by 32% in 2014 and 19.% in 2015. The most strong growth will be general lighting, and we expect demand area in this area to increase by 71%. Therefore, we expect 2014 In the year, global general-purpose lighting LEDs will account for 43% of total demand, higher than 2013's 33. It is expected that the demand for TV/laptop/display backlight module (BLU) will drop by 2/16/8 in 2014. However, we expect tablet backlighting Module demand will increase by 32% year-on-year. Overall, we expect the total demand area of ​​backlight modules to increase by 11. The factors driving the development of LED general lighting market. We believe that the demand for LED lighting will continue to grow strongly in 2014. The main driving factors are: consumer energy conservation, environmental awareness, and LED favor. Today, don't say that urban consumers, even rural consumers, mostly know the benefits of LEDs and start using LEDs to varying degrees. Therefore, the popularity of LEDs has been greatly improved. The decline in the price of LED products has made consumers' enthusiasm for buying fast, and they are no longer hesitant because of the price. In the last two years, LED light source products have dropped by 300, which has quickly narrowed the distance from the market. The relevant government departments have strongly supported, and financial subsidies and other policy support have accelerated market incubation. The vigorous promotion of the media has made LED products more and more popular. Experts, associations, and the media have promoted and promoted LEDs in large numbers to make them known to women and children. In addition to residential lighting needs, the analysis believes that outdoor lighting and commercial lighting will continue to grow steadily, driven by government projects and incentives. The continued decline in bulb prices revealed that LED bulb prices continued to fall in 2014, mainly due to cost reductions and lighting companies' promotional plans. Lighting companies and retail channels will also expand their market share through lower-cost LED bulbs with new technologies. For example, after Cree passed the ENERGY STAR certification, Philips also launched ENERGY STAR-certified products that enable consumers to purchase Philips LED bulbs for subsidies. We expect LED bulb demand to grow steadily after the retail price of LED bulbs equivalent to 60 watts (700-900 lumens) of ordinary bulbs has fallen below $10. But bulbs will not become mainstream products in urban home improvement. Product quality continues to improve and design is improved. It has been observed from the show that product quality continues to improve and the number of omnidirectional bulbs is increasing. Our survey also shows that the cost of LED light sources has dropped to around 40-45 total operating costs. Thermally divergent materials have also changed. As LED energy efficiency increases, the industry uses more plastic materials to reduce heat generation. It is expected that the mainstream luminance of LED chips in 2014 will be around 120-140 lumens/watt. We still expect plastic leaded chip carrier (PLCC) type packaging (ie 5630) to become the mainstream product for residential light bulb replacement. However, we also expect more and more chip-on-board (COB) in the design of high-power LED bulbs (such as streetlights and downlights). Feedback on the use of ceramic substrates is positive and negative, as its cost is still higher than traditional lead frame packaging (including the recent popular epoxy molding compound (EMC). Our survey shows that lead frame packaging (including EMC) can still be Dominating the low- and medium-power LED chip market (less than 1 watt), and ceramic substrates will still be favored in the high-power market (more than 3 watts). In the next few years, between 1 watt and 3 watts of power range LED chip substrate materials are expected More intense competition. There is an increasing number of remarks about flip chip (FC) and package-free chips (PFC) that are expected to evolve into next-generation chip designs. The advantage of flip-chip or package-free chips is that structural improvements can help increase chip The angle of illumination. In addition, due to the elimination of the use of the lead frame during the packaging process, the light emitted by the chip is not blocked, which can improve the efficacy of the brightness. Investigations by several chip manufacturers indicate that they will develop flip-chip or layout Packaging chip. Epistar's recent investment in Edison Optoelectronics may be one of the high-power LED chip packaging capabilities of the wafer photoelectric layout. Strategic move. Therefore, we believe that once LED companies (either chip makers or packaging manufacturers) decide to increase capital expenditure on new equipment, the growth of flip-chip and package-free chips will be stronger. This is expected to further reduce the cost of LED chips. From the simple lighting products to the integrated lighting system to the Taipei Lighting Show, the focus has shifted to several important topics, such as home smart lighting applications. Several companies (like Delta Electronics and Everlight Electronics) have demonstrated the concept of intelligent lighting. For example, the lighting industry has introduced a user interface called Digital Addressable Lighting Interface (DALI) that incorporates environmental sensors and some data transfer technologies (such as Power Line Communication (PLC) and ZigBee) to determine the room. Whether there is the brightness of the ambient light and whether it should be turned on and the brightness level that needs to be turned on. There are several advantages to using LEDs in intelligent lighting systems. First, LED is one of the most energy-efficient lighting products, which is compatible with intelligent lighting systems. The main purpose. Secondly, by producing dimmable, LED bulbs with adjustable color and temperature are an easier way to meet different uses in a room or space. Finally, in some areas (such as the medical industry that requires a certain color and light length) and the need to stimulate growth, development and LEDs are better than traditional lighting technology. Intelligent lighting systems use LEDs. We believe this will be another driving force for LEDs to achieve long-term growth in general lighting beyond the current demand for replacement of existing bulbs. One point to emphasize is that the actual MOCVD equipment may actually take output 2-3 quarters later than the time the order is placed (assuming 3-4 months for equipment delivery and 2-3 months for mass production preparation) In addition, our survey of some key peripheral manufacturers shows that cutting and sorting machines may take longer to deliver. Therefore, we believe that our current forecast of a capacity increase of 18 in 2014 may have downside risks. The LED industry faces multiple risks, including fluctuations in terminal demand (especially fluctuations in the general market penetration rate). LED chip production expansion discipline may lead to potential oversupply risks and the resulting average selling price and profit margin pressure. .
Medical Spare Parts,Medical Spare Aluminum,Emergency Stretch Parts,Oem Spare Parts Aluminum Die Casting
Zhejiang Noken Mechanical Technology Co., LTD , https://www.nkcasting.com