The climate change legislation is frustrated. From all aspects, so far, the externally expected US climate bill has died. In relation to climate change-related legislation, the U.S. Congress has proposed limiting greenhouse gases and allowing companies to trade carbon emissions targets in accordance with the cap-and-trade system of carbon emissions regulations. However, this plan was eventually rejected in the Senate after the House of Representatives passed through the House of Representatives. Republican attacks on the program will drive up energy prices, which is detrimental to the U.S. economy.
In November last year, after the US Congress’s midterm election, the Republican Party recaptured part of the Senate seat, which made hope that the bill would pass through the US Congress for a long time to come.
EPA "Promise"
Faced with allegations that the United States is delaying its actions in climate change, the Obama administration emphasized that although legislation is frustrated, it can also implement administrative measures, such as the US Environmental Protection Agency’s use of the “Clean Air Act†to regulate greenhouse gases, to achieve Obama’s The President's commitment at the Copenhagen Climate Conference - by 2020 will achieve a carbon emission reduction target of 17% by 2005.
At the end of last year, the EPA responded to this. The agency issued a statement on its website that, although the action in Congress was slow, it would act alone to achieve the goal of controlling greenhouse gas emissions.
The US Environmental Protection Agency announced that it intends to formulate new standards for greenhouse gas emissions from power plants and petroleum refineries in order to effectively protect the environment. Lisa Jackson, director of the US Environmental Protection Agency, said that the purpose of doing so is to reduce pollution more effectively and to contribute to climate change. "We must stick to our commitment to effectively reduce greenhouse gas emissions in an effective and prudent manner because they do pose a threat to the health and well-being of the American people." Jackson pointed out that the reason why the new standards for greenhouse gas emissions from power plants and petroleum refineries was introduced was that the greenhouse gas emissions of these two types of plants accounted for 40% of total US emissions.
Relevant measures have been introduced. Jackson said in a statement that several US states and some local governments and environmental organizations have been requesting the EPA to update and publish new standards for greenhouse gas emissions from power plants and petroleum refineries as soon as possible. The EPA also said that it will take an unprecedented measure to directly issue the Air Standards Directive to the industrial sector in Texas because the state indicated that it is not willing to comply with the GHG regulations that were issued by the US EPA on January 2 this year. Regulations.
The US Environmental Protection Agency recently published the first federal guidelines on the reduction of greenhouse gas emissions in related industries. On November 10 last year, the agency sent new guidelines to the states. It recommends that U.S. power plants and oil refineries replace fossil fuels that pollute the air with clean fuels and require that the efficiency of electricity and energy use in existing nuclear power plants be maximized.
In the statement of the day, Jackson said that the US EPA intends to launch emission standard recommendations for power plants and petroleum refineries in July 2011 and December 2011 respectively, and the final standards will be in May and December 2012 respectively. Released on the month. It is understood that in the process of formulating this rule, the department will also arrange a hearing with industry representatives and local government representatives.
430 Stainless Steel Cut Wire Shot
Stainless Steel Cut Wire Shot is a very important Metal Abrasive.It is often utilized in wheel blasting processes when ferrous contamination of work piece is forbidden. When Blasting stainless work pieces or other metals need to be down as a pristine surface, stainless cut wire may be a very good metal abrasive to take into consideration. Stainless Steel Cut Wire Shot As Conditioned is usually used for shot peening processes on stainless steel or Inconel parts. Stainless steel cut wire can range in size from 0.15mm up to 3.0mm and possibly larger in special order circumstances.
Concerning stainless steel cut wire shot, it has a very bright surface, maintains its shape longer then cast abrasives and it has a dust free surface. Stainless Steel Cut Wire is available as cut or conditioned and with various chemical compositions.The bulk density of stainless steel cut wire shot is very high and must be taken into consideration in relation to its use in equipment. Suitable equipment must be selected to convey Stainless Steel Shot.
430 Stainless Steel Cut Wire Shot,Sus430Stainless Steel Cut Wire Shot,Ss430 Stainless Steel Shot,Astm430 Stainless Steel Cut Wire Shot
Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com