The customer purchased the company's double-flange level transmitter, which is a new type of differential pressure transmitter produced by our company with the introduction of foreign advanced technology and equipment. The key raw materials, components and parts are all imported. After rigorous assembly and testing, the product features advanced design principles, complete specifications, and easy installation and use. Because the double-flange liquid level transmitter completely integrates the structural advantages of the two most popular and widely-used transmitters (Rosemount 3051 and Yokogawa EJA) at present, it gives users a refreshing feeling. At the same time with the traditional 1151, CECC and other products in the installation can be directly replaced, there is a strong commonality and alternative capabilities. In order to adapt to the continuous improvement and development of the domestic automation level, this series of double-flange transmitters in addition to the small and exquisite design, also introduced intelligent functions with HART fieldbus protocol.
Double flange level transmitter installation points are as follows:
JSRY-3851DP dual flange liquid level transmitter to measure the liquid level in the installation, the negative pressure chamber should be installed in the upper end, the positive pressure chamber is installed in the lower end, the instrument body is installed in the middle, so the transmitter has a negative differential pressure, If this negative pressure is not large, it can be removed by zeroing. However, when there is a certain value, the negative migration method can be used for elimination. It should be noted that the size of the negative migration range is only related to the difference between the height of the two flanges h and the height Ho of the constant level. , regardless of the height of the transmitter installation location.
Double Flange Level Transmitter: What conditions are suitable for this? details as follows:
1. It is necessary to isolate the high temperature medium from the transmitter.
2. The measurement medium has corrosive effects on the transmitter's sensitive components.
3. The measured medium cures or crystallizes due to environmental or temperature changes.
4, replace the measured media need to strictly clean the measuring head
5, suspended liquid or high viscosity media
6. The measuring head must be kept clean and hygienic.
7, sealed pressure vessel measurement.
Steel structure materials are included H section steel, box section steel, X-crossing section steel as the building's main steel framework, and Z section steel, C section steel, L section steel, U -section steel as its secondary system, Roof and walls using a variety of steel panels or light cement bricks.
Steel structure advantages:
1- Short time and high efficiency
All the steel parts can be pre-fabricated at the factory workshop, So they are super-quick to build at site. Shorten the construction time of the entire project, which can be put into use faster and produce benefits.
2- Safe and Reliable and Unbreakable
High strength of high-quality steel materials, integration of reasonable building structure design make the whole building is protected from damage in typhoon zones, earthquake zones and other harsh environments.
3- Wide range of application
Ready-made structural sections are available. They can be made to take any kind of shape, and clad with any type of material. Use to Industrial, commercial, civil buildings , and many public building facilities.
4- Environmentally, Friendly, Recyclable
All steel materials can be used and will not cause damage to the natural environment.
Section Steel,Profile Steel,Steel Sections,Shaped Steel
Tianjin Youfa Steel Co., Ltd , https://www.cnyoufasteel.com