Sprayed bar sprayers for large area spraying of pesticides use a piston diaphragm pump, which is a reciprocating positive displacement pump with pulsating pressure. Diaphragm pump power generally come from the tractor, driven diaphragm pump speed is generally 500-600r / min to two-cylinder pump, for example, the water pulsation is 1000-1200 times / min. Outlet pulsation on the spray machine and spray quality are harmful, in order to eliminate pulsation, in such pumps with an important component; gas chamber. The function of the air chamber is to utilize the compressibility (or elasticity) of the air to absorb the pulsation of the diaphragm pump and stabilize it.
The structure of the air chamber is generally separated by a rubber diaphragm that separates the water chamber from the air chamber. After filling the air cavity with compressed air, the water in the water chamber is absorbed by the compressed air in the air chamber through the rubber diaphragm, and the flow into the system is basically steady. But to achieve the basic requirements of steady flow, there is a premise that the gas pressure in the gas chamber should be compatible with the water pressure.
Thus, before the sprayer should be properly inflated diaphragm pump chamber. How to inflate properly?
Method 1. diaphragm pump before operation, the first inflatable to the gas chamber, the pressure is greater than the working pressure of the pump. Driven diaphragm pumps, transferred to the working pressure, this time you can see the pump water drastic jitter. Take a needle, the top of the gas nozzle at the deflation, with the deflation, the water hose jitter will gradually disappear. After the water hose steady, stop deflating.
Method 2. Drive the diaphragm pump to adjust to working pressure. At this point because there is no pressure in the gas chamber, the pump water hose fierce jitter. Inflation immediately to the gas chamber, with the inflatable, water hose jitter disappear. Stop the inflation after the water hose is steady.
The above two methods are operating under the operation, the operation must pay attention to safety.
This article Keywords: diaphragm pump
Mud Pump for oil drilling
Mud pump has a longer stroke and can be operated at a lower stroke, thus improved the water supplying perfor-mance effectively and extended the lifetime of expendable parts in the fluid end greatly.
The power end uses combined lubricating system of forced lubrication and splash lubrication. Reliable to lubricate and promote the service life of power end.
This series mud pump are strictly manufactured according to API Spec 7k "the Equipment Specification of Well Drilling and Repairing", and are tested accordingly when leave factory.
Features of drilling rig mud pump
1. The pump has features of advanced structure, small volume, reliable operation, easy maintenance.
2. The cylinder is made of alloy steel forgings, and the three cylinders of each pump are interchangeable.
3. In order to enhance its corrosion resistance, the cylinder surface is processed by chemical nickel plating.
4. The design of straight-through cylinder valve structure, reduced the volume of the hydraulic cylinder and increased the volumetric efficiency.
Mud Pump,Mud Sucker Pump,Mud Hog Pump,Drilling Mud Pump
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com