Super Cone Rubber Fender / Marine Fender (HC1300H)

• Model NO.: HC1300H
• Shape: Cone Type
• Size: 1300h
• Marine Parts: Fender, Bumper
• Certification: BV, ISO9001, CCS, SGS, Lloyd′s
• Transport Package: Container
• Origin: Qingdao, China

• Material: Rubber
• Structure: Solid
• Type: Inland and Coastal Boats
• Usage: Ship Launching, Protection, Ship Docking
• Trademark: TIANDUN
• Specification: CE, SGS, BV, Lloyd′s, ISO9001

Competitive Advantage:
1. The energy absorption doubles comparing with the super cell rubber fender with same spec.
2. In the case with similar reaction force and energy absorption, small size TD-AA cone type fender can substitute relative large TD-A super cell type fender.
3. In the case of oblique berthing (less than a angle of 10°),the performance can not be reduced, which is preferred to TD-A model.
4. The frontal frame (steel frame) are installed in front of fenders, which can reduce the surface pressure against vessel hull. The surface can be limited below 25t/m2, which is suitable to large vessel especially.
5.The super high density polyethylene pads are adhered to the frontal frame, which can reduce the friction factor between hull and fender to below 0.2, and can reduce the shear (horizontal force) exerted on fenders when vessel berth, which can prolong the service life of fenders.
6.The frontal frame adopts water-tight structure with high strength and better anti-rust performance.
TIANDUN Cone Rubber Fender:
 
1. High efficiency and outstanding performance
TIANDUN Cone Fenders have excellent energy characteristics, with up to 72% compression for greater travel, and are highly effective even in severe angular berthing applications. This outstanding performance enables a cone fender to be used instead of a larger and more costly alternative. With their extreme stability and resistance to shear as well as their angular berthing performance, TIANDUN Cone Fenders provide unrivalled flexibility and economy.
 
2. The latest design construction 
Cone Fenders with the conical body shape and frontal mount steel frame are the latest generation product of "cell" type fenders, with optimal performance and efficiency. They provide an excellent energy capability with a low reaction (their designed compress deformation rise from 52.5% to 70% while the reaction force is unchanged.). The conical design and circular mounting base make them extremely stable fenders especially where angular performance is required.
 
3. Applications
TIANDUN cone fenders are ideally suited to a wide range of berthing applications including oil and LNG facilities, offshore platforms, bulk terminals, general cargo, container berths, RoRo and cruise terminals.
 
4. Excellent energy capability
The normal compression of a Cone Fender is 70% and its maximum compression is 72%. They are available in sizes from 350mm high to 2000mm high.
 

Electric Counter Balance Forklift

Zowell electric counterbalance forklift is a material handling for both indoor and outdoor use. The fork is set outside the center line of front wheel. With the counterbalance installed at the tail, this forklift can easily offset the weight of goods. The counter balanced forklift equipped with pneumatic tire to ensure operation speed and gradeability. It is widely used in loading, unloading, stacking and transporting finished goods in ports, stations and factory. Counterweight forklift within 3 tons can also operate in cabins, train compartments and containers.

Safe, efficiency, comfortable, no pollution are key features and targets of Zowell counter balanced forklift as well as other products. Ergonomical design on rear-position multi-valve and bias layout of instrument panel, makes operation safer. The ultra-low torque steering system greatly improves the reliability of steering. Besides, full range of customized attachment choices such as side shift, fork positioner, bale clamp, stabilizers, full closed cabin and heater can also be added into solid and scalable body.

The load capacity of FE counterbalanced forklifts ranges from 1500kg to 3500kg. The maximum lift height is 6000mm. If you have bigger load capacity or other need, please contact us for a professional help.

Lonking forklift,Linde forklift,Big material handling,port goods transport

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com