In some large venues, such as supermarkets, hospitals, and parking lots, everyone can see public toilets. However, when people participate in some large-scale activities, they will always be troubled by the problem of going to the toilet. At this time, it needs a floating toilet car. What are the advantages of mobile toilet cars ?
Mobile toilets , as the name suggests, are vehicles that can be readily flown and provide relevant services to people in need. Its main advantages are the following:
1, the automatic flushing speed is faster, no residual odor: Compared to the traditional public toilets, mobile toilets are generally compressed air and water mixed release high-pressure gas water through a special nozzle on the toilet to flush the feces, urine flushing water once for Two hundred milliliters, the stool flushed twice with a total of four hundred milliliters of water, and the toilet bowl used in the toilet was a drop-in weighted sealed baffle toilet. It was clean and smell-free.
2, with its own antifreeze system to ensure the normal use of the winter: common; mobile toilet vehicles are designed with a frost protection system. As long as the antifreeze system it is installed in is in normal operation, it can be ensured that mobile toilet cars can still be used normally in low temperature environments.
3, the scope of application is more extensive: the so-called mobile toilet car is on the basis of the original, can move with the time, local changes in the toilet. Therefore, mobile toilet cars can be seen around subways, train stations, and hospitals.
4, automatic control, can identify their own urine: Unlike traditional toilets, mobile toilet cars can identify their own urine, and can be washed according to the actual situation. It will not make this kind of problem a factor that affects everyone's normal life.
For mobile toilets, the author first introduced the advantages of the relevant parties. If you have some questions about these aspects before, you may wish to get some useful information through the author's article. Hope to help you.
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
The role of edge banding:
First, the edge banding has the function of blocking harmful gases such as formaldehyde
Good edge banding or multi-sided edge banding can reduce the amount of formaldehyde emission per unit time (ie, slow down the emission rate). It is worth noting that edge banding will not reduce the formaldehyde content of the board, but this has the advantage of edge banding. It can reduce the formaldehyde emission per unit time of unenvironmentally-friendly sheets to a level that is acceptable to humans and does not affect health.
Second, the role of beautifying furniture
Good edge banding has the effect of beautifying office furniture, but if it is to be beautiful, the requirements for edge banding will be higher. Not only must the edge banding and the end surface of the board be firmly and smoothly combined, but also that the edge banding must be combined with other The joints of the surfaces should not have defects such as bottoming, chipping, and large gaps, and the transition should be natural, smooth and smooth.
Third, extend the service life of office furniture
The precise edge sealing design of the board can prevent water or other liquids from entering the board, avoiding the expansion, deformation and breeding of bacteria on the desktop, thereby prolonging the service life of the office furniture, and the office furniture after the edge sealing treatment is also more expensive in terms of cleaning easy.
Fourth, avoid sharp edges and corners from hurting people's bodies
The general edge banding will use the dull edge banding design to smooth the corners of the table, thereby reducing the damage to the body by the sharp corners
PVC Edge Banding For Office,Pvc Edge Banding For Office,Pvc Edge Banding For Office Table,Pvc Edge Banding For Office Furniture
Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com